Loading ...
Loading ...
Loading ...
3. Press the RESET control to enter
the calibration mode. The display
will show CIRCLE SLOWLY TO CAL.
4. Slowly drive the vehicle at less
than 5 km/h (3 mph) in a circle,
taking at least 20 seconds to
complete one circle, until the
display shows a direction (north,
south, etc.).
5. The compass is now calibrated.
If the message center display shows CHECK COMPASS SYSTEM during
any of the compass adjustment
procedures, contact your dealer.
System check
Pressing this control causes the
message center to cycle through a
status of each of the systems being
monitored.
The sequence of the system check
report is as follows:
• engine oil life status
• engine oil life left
• engine oil level
• voltage level
• engine coolant temperature
• engine coolant level
• washer fluid level
• doors closed (driver and passenger side)
• trunk closed
• exterior lamps (head, front turn, brake and tail)
• air ride system
• traction control
• fuel level
• kilometers to empty (miles to empty)
RESET
N
S
W
E
DATE
TIME
SYSTEM
CHECK
RESET
N
S
W
E
DATE
TIME
SYSTEM
CHECK
Instrumentation
24
Loading ...
Loading ...
Loading ...