Loading ...
Loading ...
Loading ...
11
Care & Cleaning
Unplug the power cord from the power outlet
after use for safety reasons.
Tumbler cups and lids
To keep your cups and lids clean, avoid
allowing food residue to dry on them. Follow
these steps as soon as possible after use:
• Rinse most of the residue off the blades,
cup and lid.
• Hand wash in warm, soapy water using a mild
liquid detergent and non-abrasive sponge.
Motor base
To clean the motor base, wipe with a soft,
damp cloth then dry thoroughly. Wipe any
excess food particles from the power cord.
Cleaning agents
Do not use abrasive scouring pads or cleansers
on either the motor base or the cups, as they
may scratch the surface. Use only warm soap
water with a soft cloth.
Pressurisation
The cups may be rinsed by adding cold water,
attaching blades, and either blending or
shaking by hand for 10 seconds.
IMPORTANT: There is a risk of pressurisation
from hot water and/or detergent.
When rinsing by attaching blades and
blending/shaking, never add hot or even
warm water, as the steam produced can create
dangerous pressurisation of steam.
Do not add detergent, as the foam produced
will expand and may cause pressurisation.
Dishwasher
The cups, lids and blade assembly may be
washed in the dishwasher on the top shelf only.
Stubborn food stains and odours
Strong smelling foods such cumin and
coriander, and some vegetables such as carrots
may leave an odour or stain the blades, cup
or lid.
To remove, pour warm soapy water and fill to
the MAX mark. Set aside to soak for 5 minutes.
Then wash with a mild detergent and warm
water, rinse well and dry thoroughly. Store cups
with lids off.
Citrus
Exposure to citrus oil may affect the clarity
and longevity of the Tritan cups. After washing
in detergent, rinse with plain water thoroughly,
and allow to dry immediately. Do not soak if
citrus has been blended.
Storage
Store upright with the cups and blades
assembled and resting on the motor base,
or beside it. Do not store with the cup turned
to the ON position, as this means the motor is
engaged and will turn on immediately when
plugged in or switched on at the wall.
Loading ...