Loading ...
Loading ...
Loading ...
2
1
2
0
3
0
A
B
If the programme has a prewash phase, put a small quantity of detergent also in compartment B.
ADDING MULTI-TABLETS
2
1
2
0
3
0
2
1
2
0
3
0
• Adjust the water softener to the lowest level.
THE AUTO OFF FUNCTION
This function decreases energy consumption by
deactivating automatically the appliance when it is
not operating.
The function comes into operation:
• 5 minutes after the completion of the
programme.
• After 5 minutes if the programme has not
started.
STARTING A PROGRAMME
1. Keep the appliance door ajar.
2. Press the on/off button to activate the
appliance. Make sure that the appliance is in
programme selection mode.
3. Press one of the programme buttons until the
display shows the number of the desired
programme. The display shows the programme
duration after some seconds.
4. Set the applicable options.
5. Close the appliance door to start the
programme.
XTRADRY OPTION
Activate this option when you want to boost the
drying performance. With the use of this option, the
duration of some programmes, water consumption
and the last rinse temperature can be affected.
The XtraDry option is a permanent option for all
programmes other than Eco and need not to be
selected at every cycle.
DELAY OPTION
1. Set a programme.
2. Press Delay until the display shows the delay
time you want to set (1-24h).
The delay time flashes in the display.
3. Close the appliance door. The countdown
starts to decrease by 1 hour.
When the countdown is complete the programme
starts.
10
Loading ...
Loading ...
Loading ...