#2 Our dishwasher sits a little bit out from our kitchen bench, which means that the front panel (power, programs and on) is often lent on or brushed against. This make the dishwasher turn on, and if you get the other end start running. I have, more than a few times, stopped a cycle mid-way because of this. When the machine is restarted it doesn't go back to where it was in the cycle, so you have to start again. It took me nearly a day to wash a load of dishes as I was working in the kitchen and it keep being stopped and restarted. I don't understand how the child lock works. Would you be able to explain it to me please? I am beyond frustrated.
if you check on page 12 of the booklet There is a section LEVELLING THE APPLIANCE. They show you that you can level the feet. I think in your case, do use the spanner as shown in the design to tilt the machine a level back . If it is not enough. I would put a piece or two of perspec under each foot so you can level the Dishwasher accordingly.To lock, on page 24 CONTROL LOCK ..Do ask the dealer. I think the simplest way , i do the washing in the evening. But if you have kids all day ,I understand that it’s not easy.