Loading ...
Loading ...
Loading ...
25
CARE AND CLEANING
Replacing the Oven Light
The interior oven lights are located at the rear of the oven
cavity and are covered with a glass shield. The glass shield
must be in place whenever the oven is in use (See
Figure 8).
To replace the oven interior light bulb:
1. Turn electrical power off at the main source or unplug
the appliance.
2. Remove interior oven light shield by turning a quarter
turn counter-clockwise.
3. Replace bulb with a new T-4 type Halogen 25 watt
appliance bulb.
4. Replace glass oven light shield by rotating clockwise.
5. Turn power back on again at the main source (or plug
the appliance back in).
6. Be sure to reset the time of day on the clock
Cleaning under bake element (some models)
The bake element is located in the lower oven cavity. For
some models, if the lower bake element is visible it may be
tilted up for easier access to the oven bottom for cleaning.
Remove the oven racks before raising the element. Be
careful not to raise the element more than 4 or 5 inches
from the resting position.
Be sure the oven is unplugged and all parts are cool
before replacing oven light.
Do not allow your fingers to touch the new bulb when
replacing. This will shorten the life of the bulb. Use a
paper towel or cotton glove while handling the new bulb
when installing.
Figure 8: Wall oven Halogen light
CAUTION
NOTE
Figure 9: Lift bake element
The cooking element is in the lower oven cavity. Remove
the rack from the bottom before lifting the element. Do not
lift the item more than 4 to 5 in. from its normal position.
This facilitates access to the oven floor for cleaning.
CAUTION
Loading ...
Loading ...
Loading ...