Loading ...
Loading ...
Loading ...
Adjust the settings - more you can do
Adjust the language settings
OSD – Select a language for the Setup menu and on-screen display.
There is displayed as “-” or other error mark on display when you
change OSD, do as follows;
- Restart the unit
- Change function
- Disconnect and connect USB device.
Disc Audio/Disc Subtitle/Disc Menu– Select a language for the
Menu/Audio/Subtitle.
[Original]: Refers to the original language in which the disc was recorded.
[Other]: To select another language, press number buttons then ENTER to
enter the corresponding 4-digit number according to the language code list in
the reference chapter (see page 18). If you make a mistake before pressing
ENTER, press CLEAR.
[Off] (for Disc Subtitle): Turn off Subtitle.
Adjust the display settings
TV Aspect – Select which screen aspect to use based on the shape of your TV
screen.
[4:3]: Select when a standard 4:3 TV is connected.
[16:9]: Select when a 16:9 wide TV is connected.
Display Mode – If you selected 4:3, you’ll need to define how you would like
widescreen programs and films to be displayed on your TV screen.
[Letterbox]: This displays a widescreen picture with black bands at the top
and bottom of the screen.
[Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary.
8
Adjust the settings
ON REMOTE
1Display setup menu : SETUP
2 Select a desired option on the first level:
UU uu
3 Move to second level:
ii
4 Select a desired option on the second level:
UU uu
5 Move to third level:
ii
6 Change the setting:
UU uu
, ENTER
Initial Setting the Area Code - Optional
1Display setup menu: SETUP
2Select LOCK menu on the first level:
UU uu
3 Move to second level:
The activated Area Code appears on the
second level.:
ii
4 Move to third level:
ii
5 Enter the new password: numerical buttons
(0-9) and ENTER
6 Recheck entered new password:
numerical buttons
(0-9) and ENTER
7 Select a code for a geographic area:
After select, Rating and Password will be
activated.(page 18)
UU uu II ii
8To confirm press: ENTER
Make sure to finish setting the Area Code
before leaving the setup menu if you cannot
set the Rating and Password.
When you use this unit for the first time, you have to set the Area
Code as shown below.
ON REMOTE
OSD Initial language settings - Optional
1Turn the power on:
The language list appears. POWER
2 Select the language:
UU uu II ii
3 Press: ENTER
4To confirm press:
II ii
and ENTER
During the first use of this unit, the initial language setup menu appears
on your TV screen. You must complete initial language selection before
using the unit. English will be selected as the initial language.
ON REMOTE
HS34S_D0.BGBRLL_ENG_2032 4/16/09 3:45 PM Page 8
Loading ...
Loading ...
Loading ...