Loading ...
Loading ...
Loading ...
7
Using your Sunbeam Fryware
Before the first use: Wash, rinse and dry your
fryware and lid.
1. Insert the control probe into the inlet on
the fryware.
2. Plug the cord into a 230-240V power
outlet and turn the power on.
3. Pre heat the fryware on MED/MAX setting.
Then set the control probe dial to the
desired temperature setting. Refer to page
6 for the temperature guide.
Note: The light on the control probe will
illuminate and will remain on until the
set temperature is reached. It will then
cycle on and off throughout cooking, as
the temperature is maintained by the
thermostat. On initial heating of the frypan,
it is recommended that the temperature be
allowed to cycle (the light cycling on and
off) several times. This will help the cooking
surface to adjust to a more accurate cooking
temperature.
Using the tilt & baste lever
(Models FP6000)
The tilt & baste lever is positioned under the
inlet where the control probe is inserted.
To tilt the frypan, push the lever down. This
allows the fat and juices to drain from the
food for crisp, low fat cooking. It also makes it
easier to baste food and serve sauces or gravy.
Trigger release control probe
The probe is thermostatically controlled and
incorporates an indicator light which switches
off automatically when the temperature
selected has been reached. It then cycles
on and off to indicate that the selected
temperature is being maintained.
Loading ...
Loading ...
Loading ...