Loading ...
Loading ...
Loading ...
E-8
ENGLISH
Preparation for Use
- System Connections -
„
Speaker connection
Connect the black wire to the minus (-) terminal, and the red wire to the plus
(+) terminal.
Caution:
„
FM/AM loop aerial connection
Connect the FM/AM loop aerial to the ANTENNA socket.
Position the FM aerial wire and rotate the AM loop aerial for optimum reception.
Place the AM loop aerial on a shelf, or attach it to a stand or a wall.
Notes:
z
Placing the aerial on the unit or near the AC power lead may cause noise pickup.
Place the aerial away from the unit for better reception.
z
Do not connect the attached FM aerial to an external FM aerial. Otherwise, trouble
may occur.
Installing the AM loop aerial:
< Assembling >
< Attaching to the wall >
„
Connecting the AC power lead
After checking all the connections have been made correctly, plug the AC
power lead of this unit into the wall socket. If you plug the unit first, the unit
will enter the demonstration mode (see page 10).
Note:
Unplug the unit if it will not be used for a prolonged period of time.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
Right speaker Left speaker
z
Use speakers with an impedance of 6 ohms or more, as lower impedance speakers
can damage the unit.
z
Do not mistake the right and the left channels. The
right speaker is the one on the right side when you face
the unit.
z
Do not let the bare speaker wires touch each other.
z
Do not allow any objects to fall into or to be placed in
the bass reflex ducts.
z
Do not stand or sit on the speakers. You may be in-
jured.
Incorrect
Black
Red
Wall Screws (not supplied)
Demonstration mode (See page 10.)
Loading ...
Loading ...
Loading ...