FGHF2369MF User Manual

Loading ...



NOTE

All set screws should be tightened so the screw is below the surface of the handle. The

handles should be drawn tight to freezer and refrigerator doors with no gaps. Opening the

opposite door while tightening the Allen screw makes installation easier.

The door handle may loosen over time or if it was installed improperly. If this happens,

tighten the set screws on the handles.

INSTALLING DOOR HANDLES

Door Handle Mounting Instructions for Frigidaire Gallery

1. Remove handles from carton and any other protective packaging.

2. Position fresh food handle end over upper and lower pre-installed shoulder bolts (A)

that are fastened into door, ensuring the holes for the set screws are facing towards the

opposite door.

3. Whileholdinghandlermlyagainstdoor,fastenupperandlowerAllensetscrews(B)

with supplied Allen wrench.

4. Repeat steps 2 and 3 to install opposite handle. Ensure the holes for the set screws are

facingtowardstherstdoor.

5. Position freezer handle end over left and right pre-installed handle mounts that are

fastened to the door, ensuring the holes for the set screws are facing down.

6. Whileholdinghandlermlyagainstdoor,looselytightenfarrightAllensetscrew(B)withsupplied

Allen wrench until there is no gap between handle and door.

7. Stillholdingthehandlermlytothedoor,rmlytightenfarleftAllensetscrew(B)withsupplied

Allen wrench.

8. ReturntothefarrightAllensetscrew(B)andrmlytightenwithsuppliedAllenwrench.

Mounting Refrigerator Handles

Loading ...

User Manual - Page 13