Loading ...
Loading ...
Loading ...
Using
the bridge
surface
element
The surface element on the right side of your
cooktop is designed to let you heat all parts
of a large, oblong utensil that is too large to
fit on one surface element. The Bridge Surface
Element is made up of a front section, a middle
section, and a rear section. You can heat all
sections at once, or the front and rear
sections separately.
Push down and turn the right rear surface
element control knob clockwise to and select
your desired setting. This will allow you to heat
the right rear and middle sections of the Bridge
Surface Element. To use the entire bridge
element, also push down and turn the right
front surface element control knob to the
desired setting.
Choose pans that match the heated area as
closely as possible.
To use only the right rear surface element
without the middle section, push down and
turn the right rear surface element control
knob counter-clockwise to and select
your desired setting.
Use the right front control knob to heat
the right front section of the Bridge Surface
Element.
Using
the tri-ring
surface
element
The center Tri-Ring surface element has 3 sizes to
select from so you can match the size of the element
to the size of the cookware you are using.
To use the large surface element, push
and turn the center control knob clockwise
to , stopping at the desired setting. This
will activate the entire heating area.
To use the medium surface element, press
and turn the center control knob clockwise
to , stopping at the desired setting. This
will activate the medium-size heating area.
To use the smallest surface element, press
and turn the center control knob clockwise
to , stopping at the desired setting. This
will activate the smallest, inside heating area.
Large
surface
element
setting
Medium
surface
element
setting
Small
surface
element
setting
Right rear
and bridge
surface
element
settings
Right rear
surface
element
settings
13
Loading ...
Loading ...
Loading ...