Loading ...
Loading ...
Loading ...
- 15 -
1. Remove loose dust (See EMPTYING DUST
BIN, page 13).
2. Push the dust filter cover release latch to
pull out dust filter cover.
NOTE: It is not necessary to wash the dust
filter after each vacuum use. Only wash filter
when it appears to be very dirty or there is
a noticeable reduction in vacuum suction
performance.
4. Allow filter to dry 24 hours before
putting back into vacuum cleaner. DO
NOT install damp.
NOTES:
• If filter is torn or perforated, replace it
before using vacuum.
• When the cleaning of the filter no longer
restores vacuum cleaner suctionto full
power, replace the filter.
5. Install the dust filter cover along the inside
of locating strip, and make sure you hear
a “click.”
DO NOT operate without filter
installed.
WASHING DUST BIN
WARNING
Turn off and unplug vacuum cleaner
before washing the dust bin.
CAUTION
• Do no attempt to dry the dust filter
with a hair dryer or by placing it in
a clothes dryer.
Dust Filter
Cover Release
Latch
Dust Filter
Cover
Locating
Mark
Inside of
locating
strip
Dust Filter
Cover
3. Wash all parts of the dust bin, including
the filter.
DO NOT wash in the
dishwasher.
6. Close filter door and reattach dust bin to
vacuum cleaner as shown.
Loading ...
Loading ...
Loading ...