© Tasman Sinkware
TF 45c August 2013
REMOVE EXCESS SEALANT AND MASKING
Excess sealant must be removed promptly with a suitable clean-up solvent
recommended for use on both the counter/benchtop and stainless steel to ensure
damage does not occur.
PLUMBING & TAPWARE
IMPORTANT - Connections to plumbing should always be done by a licensed plumber.
Fit supplied basket wastes to sink bowls. Install tapware according to manufacturers
instructions.
If 2 or more individual basins/bowls are under-mounted, a minimum distance of 3 ½” (90mm) is required
between the basins/bowls. The counter/benchtop supplier is to determine the support method required.
DO’s
• Clean with soap & water (towel dry)
• Clean along the grain of the Stainless Stee
• Use a soft brush or sponge (old tooth brush)
• Wipe over with a glass cleaner (Windex is very good)
• Polish with a metal polish paste (Autosol / Brasso)
• Use a Liquid cleaner (Bon-Ami or Jiff)
• Use a granulated stainless steel cleaner (Essteele)
DO NOT’s
• NEVER use Steel wool
• Beware of harsh liquid cleaners
• Beware of grit within cloths and mineral deposits within water
• Avoid prolonged exposure to acids from Fruit, Fruit juices, Salts, Spirits, Bleach, Tea-bags
• Avoid prolonged contact with ordinary steel which can rust Tin Cans, Steelwool
• Do not keep harsh (acids or chlorine) chemicals under sink / laundry tub
• Do not leave chlorine/chloride chemicals on stainless steel surface
• Do not leave liquid soaps & cleaners to dry on stainless steel
• Do not use bleaches (White King, Domestos, Clorox)
MATERIALS FOR FITTING THE UNDERMOUNT SINK:
• Oliveri sink includes mounting clips, basket wastes and other
accessories (depending on model).
• These Installation Instructions
• Level to check counter/benchtop & sink is installed level
• Flat head screwdriver (large - to tighten basket wastes)
• Suitable sealant and fastening materials (neutral-cure silicone sealant
and structural epoxy or hardware)
• Masking material to protect counter/benchtop and sink from excess
sealant
• Clamping Mechanism (such as threaded rod and timber bearers)
• Additional Mounting Hardwareifttingintothinnermaterial.The
instructions for bolting the sink require a minimum counter/benchtop
thickness of 25mm / 1”. Different hardware or packing materials will be
needed for thin counters/benchtops.
It is essential that the installation is waterproof and carried out in accordance with these instructions.
Tasman Sinkware will not be held responsible for any damage caused by leakage or faulty installation.
CARE INSTRUCTIONS FOR YOUR OLIVERI STAINLESS STEEL SINK
AVOID CONTACT WITH ROUGH OR DIRTY SURFACES as new polished stainless steel will show scratches!
INSTALLER - PLEASE READ & FOLLOW THESE
INSTALLATION INSTRUCTIONS
Please retain for consumer as care instructions are included
IT IS HIGHLY RECOMMENDED THE ACTUAL SINK BE PRESENT AT TIME OF CUTTING
Any advice, recommendation, information, assistance or service provided by Tasman Sinkware in
relation to goods manufactured by it or their use and installation, is given in good faith and is believed by
Tasman Sinkware to be appropriate and reliable. However, any advice, recommendation, information,
assistance or service is provided by Tasman Sinkware without responsibility or liability.
FOR UNDERMOUNT SINKS
CHECK MODEL
The model number on the sink
packaging must match the model
of sink the customer ordered.
Do not install if incorrect.
AVOID CUTS
The perimeter and punch-outs on
the sink may contain sharp edges.
Handle the sink carefully to avoid
personal injury.
CHECK THE CONDITION
Inspect the sink for any visible
defects. Do not install the sink if
defects are found. Contact your
sink retailer / point of purchase.
AVOID SCRATCHES
Stainless steel can be scratched if proper
care is not taken during installation.
Download cutout
template les
(PDF, DWG & DXF)
from our website.
ASIA PACIFIC DISTRIBUTORS
New Zealand - Dux Industries Ltd
Phone: 0800 367 389
Singapore - Sim Siang Choon
Phone: 6266 6632
Hong Kong - Deacon & Co Ltd
Phone: 2369 6111
NORTH AMERICA
SalesOfce
Tasman Sinkware North America
Corona CA
Email: [email protected]
UNITED KINGDOM DISTRIBUTOR
A.C. Toon Ltd
Phone: 01246 223900
Email: [email protected]
AUSTRALIA
HeadOfce&
Manufacturing Plant
Tasman Sinkware Pty Ltd
Regency Park SA
Phone: +61 8 8348 6444
Fax: +61 8 8348 6495
Email: [email protected]
www.oliverisinks.com
Tasman Sinkware
is a division of
Fletcher Building
Loading ...
