Loading ...
Loading ...
Loading ...
49-2000492 Rev. 2 27
INSTALLATION INSTRUCTIONS
Installation Instructions
C6
MOUNT THE KITCHEN HUB™
CAUTION
To avoid the
risk of personal injury (back
injury or other injuries due to
excessive weight of the unit)
or property damage, you will
need two people to install
this product.
IMPORTANT: Do not put any pressure on front
screen during installation.
WARNING
Risk of Electric Shock. Can
cause injury or death: If installing unit with metal
cabinets, cover the edge of the power supply
cord hole with the nylon grommet in hardware
bag.
IMPORTANT: If filler blocks are not used, case
damage may occur from overtightening screws.
NOTE: When mounting the unit, thread power cord
through hole in bottom of top cabinet. Keep it tight
throughout Steps 1–3. Do not pinch cord or lift unit
by pulling cord.
1. Lift unit, tilt it forward, and hook slots at back bottom
edge onto four lower tabs of mounting plate.
C6
MOUNT THE KITCHEN HUB™
(Cont.)
2. Rotate front of unit up against cabinet bottom.
3. Insert 2 self-aligning screws (1/4”-28 x 3-1/4”)
through top-center cabinet hole. Turn two full
turns on each screw.
4. Tighten the 2 screws to the top of the unit. (While
tightening screws, hold the unit in place against
the wall and the top cabinet.)
C7
FINALIZE INSTALLATION
Plug in the unit.
Cabinet Front
Cabinet Bottom Shelf
Filler Block
Unit Top
Equivalent
to Depth
of Cabinet
Recess
Self-Aligning Screw
This
distance
can NOT
exceed 2”
to ensure
proper
installation
C. OUTSIDE BACK EXHAUST (Horizontal Duct) (Cont.)
Loading ...
Loading ...
Loading ...