Loading ...
Loading ...
Loading ...
Operating Your Dryer
12
O
perating Your Dryer
5. Close the door.
Before you close the door, make sure fabrics
are well placed inside and that foreign objects,
especially flammable ones, are not caught
around door.
6. Select the drying cycle you want.
You can choose a cycle by turning the program control
knob until the required program is indicated.
If you press Start/Pause button without choosing a cycle,
the dryer will proceed with the Cupboard program. [Please
refer to following Cycle Selection table (page 10) for the
detailed information.
7. Press the start button.
You can hear drum rotating.
8. After operation is completed, open the
door and remove the laundry.
Careful! the drum inside could still be hot.
(Operation time varies depending on your cycle
selection or options.)
9. Clean the lint filters and
empty water container.
The lint filter should be cleaned after each load.
10. Turn off the dryer.
Press the ‘‘Power’’ button.
Select the
desired
cycle.
Take out
the laundry.
Clean the
door lint
filter.
- Be careful not to trap laundry in between the
loading door and rubber seal.
CAUTION
- Be careful of the fact that filter should not be
torn when using a vaccum cleaner. If there
is a little residue buildup on filter, you can
scrub lint screen with the brush to remove.
- If you want to open the door while dryer is
operating, please press the Start/Pause
button first, wait until drum completely stops
and then open the door.
CAUTION
Loading ...
Loading ...
Loading ...