Documents: Go to download!
User Manual
- Owner's manual - (English, French, Spanish)
- Instruction manual - (English)
- Enery Guide - (English)
- Quick Specs - (English)
- Operating Instructions
- Care and cleaning
- Troubleshooting
Table of contents
Owner Manual Dishwasher
Operating Instructions
Getting started!
Features and appearance will vary throughout this manual
- Load Dishwasher
For best dishwashing results, follow the loading guidelines found in the Loading the dishwasher section. No pre-rinsing of normal food soil is required. Scrape off hard soils, including bones, toothpicks, skins, and seeds. Remove leafy vegetables, meat trimmings, and excessive amounts of grease or oil. - Add Detergent
Add needed amount of detergent to the detergent dispenser. Use a detergent such as Cascade ® Platinum Pacs. See Detergent Dispenser in the Using the dishwasher section. - Add Rinse Agent
Add Rinse Agent to the rinse agent dispenser. See Use a Rinse Agent in the Using the dishwasher section. - Select Cycle
Press the Select Cycle button for the desired wash cycle. On some models, the light next to the Select Cycle button will be lit to indicate which wash cycle has been selected. On other models, pressing the Select Cycle button will show various cycles in the display window. Press the button until the desired cycle is shown.
NOTE: Actual cycle times vary based on soil level, water temperature, and options selected.
See other models: ESS25XGMAWW JBP80KK2CC JBP80CF1CC GDS18SBPALSS GSM2200V55BB
The cycle may be selected with the door in the open position. The cycle will not start until after the door is closed and Start selected within 10 seconds.
*Washing time only. Does not include drying time, Auto Hot Start, or options.
NOTE: If the incoming water temperature is too low, the Auto Hot Start feature may add up to 11 minutes of additional time. - Select Options
The light by the selected button will be lit to indicate which Option has been selected.
- Start Dishwasher
- Cycle Indicator Lights and Sounds
Using the dishwasher.
Check the Water Temperature
The entering water should be at least 120°F (49°C) and not more than 150°F (66°C) for effective cleaning and to prevent dish damage. Check the water temperature with a candy or meat thermometer.
Turn on the hot water faucet nearest the dishwasher, place the thermometer in a glass and let the water run continuously into the glass until the temperature stops rising.
Use a Rinse Agent
Rinse agents, such as Cascade ® Rinse Aid are designed for great drying action and to protect against spots and film build-up on your dishes, glasses, flatware, cookware, and plastic.
Filling the Dispenser
The rinse agent dispenser holds 3.5 oz. (104 ml) of rinse agent. Under normal conditions, this will last approximately one month - depending on setting.
- Make sure the dishwasher door is fully open.
- Open the Rinse Agent dispenser door.
- Slowly add rinse agent until the cup is full. You may need to pause several times to allow rinse aid to settle.
- Clean up any spilled rinse agent with a damp cloth to prevent foam from forming inside the dishwasher.
- Close the Rinse Agent dispenser door.
Rinse agent adjuster
The amount of rinse agent released into the final wash can be adjusted. If water drops or hard water spots remain on dishes after the dry cycle, increase the setting.
To adjust the setting
Open the Rinse Agent dispenser door; then turn the adjuster clockwise to increase the amount of rinse agent, counterclockwise to reduce the amount of rinse agent.
Leak Protection (on some models)
If a leak is detected, the dishwasher will drain and the cycle will stop. The display will show “LEAK DETECTED”. Call for service.
Detergent Dispenser
The detergent dispenser is located in the center of the dishwasher door. It has two compartments. The main wash compartment is found inside the detergent dispenser. To open, press the button on the side of the dispenser. The pre-wash compartment is on the lid of the detergent dispenser. Use the pre-wash compartment only when your water is extremely hard or when you have a heavy soiled load. The pre-wash compartment is not used when tablet or packet detergents are used.
NOTE: Do not load large items in the lower rack where they may block the wash jets from rinsing out the detergent dispenser.
You may use tablet, packet, powder, liquid or gel automatic dishwasher detergent. Make sure you use only detergents specifically labeled for use in automatic dishwashers. Never use liquid hand dish detergent in an automatic dishwasher. Sudsing and poor wash performance will result with the use of improper detergents.
Detergents should be stored in a dry location and in their original container to prevent loss of effectiveness. Place detergent in the cup just prior to starting the dishwasher and then close the cover. The cover will open during the wash cycle.
Filling the Detergent Dispenser
GE recommends using detergent in tablet or packet form. Independent testing has shown this form of detergent is very effective in the dishwasher. Cascade ® Platinum Pacs are an example of this type of detergent. Simply put a tablet or packet into the main wash compartment and slide to close the detergent cup cover. Please notice that the tablet or packet must be placed in the main wash compartment of the detergent cup. If the tablet or packet is placed in the prewash compartment or tossed in the bottom of the dishwasher, the detergent will be flushed down the drain in a very short period of time and will thus be wasted. Wash performance will be very poor as a result.
If you choose to use detergent in powder, liquid or gel form, the amount of detergent you use will be determined by the hardness of your water, the temperature of your water, and the food soil load inside the dishwasher. Contact your water company to get information about the hardness of the water in your area. Water hardness is measured in grains per gallon. Use this information and the table above to determine the amount of detergent to use. You may purchase a hard water test strip from GE. Call 1-877-959-8688 and ask for part number WD01X10295. In Canada, call 1-800-661-1616.
Using too much detergent with very soft and/or very hot water may cause a condition called etching on your glassware. Etching is a permanent cloudiness in your glassware. This condition is irreversible. However, using too little detergent will cause poor wash performance.
Use the table as a starting point and then adjust the amount of detergent you use. Use just enough to get good wash performance. Using just the right amount of detergent will provide great wash performance without wasting detergent or etching glassware.
NOTE: Using a detergent that is not specifically designed for dishwashers will cause the dishwasher to fill with suds. During operation, these suds will spill out of the dishwasher vents, covering the kitchen floor and making the floor wet.
Because so many detergent containers look alike, store the dishwasher detergent in a separate space from all other cleaners. Show anyone who may use the dishwasher the correct detergent and where it is stored.
While there will be no lasting damage to the dishwasher, your dishes will not get clean using a dishwashing detergent that is not formulated for automatic dishwashers.
Loading the dishwasher.
For best dishwashing results, follow these loading guidelines. Features and appearance of racks and silverware baskets may vary from your model.
Upper Rack
The upper rack is primarily for glasses, cups, and saucers. For best wash performance, tilt cup and glass openings toward the center of the rack. Other items such as pots, pans, and plates may be placed in the upper rack. This is also a secure place for dishwasher-safe plastic items. The upper rack can be used for odd sized utensils. Sauce pans, mixing bowls, and other similarly shaped items should be placed face down for best wash performance. Ensure small plastic items are secure so that they cannot fall on the heater at the bottom of the dishwasher, potentially damaging the item. Some models are equipped with a hidden heater, so dishwasher safe plastic items can be placed in the lower rack.
IMPORTANT: Ensure items in the upper rack do not interfere with the 3rd Rack (on some models) when loading and unloading.
IMPORTANT: Ensure that items do not protrude through the bottom of the rack or silverware basket where they will block the rotation of the middle spray arm. This could result in noise during operation and/ or poor wash performance.
The Bottle Wash system (on some models) is the ideal location to position baby bottles and tall sports bottles. The Bottle Wash clips hold bottles with small openings in place so water jets are directed inside the bottles to clean hard to reach areas. Clips can be installed or removed by simply slipping the clip opening over the top of the nozzle.
Bottle Wash
Sports bottle held in place over a Bottle Wash clip
Baby bottle held in place under a Bottle Wash clip
The upper rack allows 2” of adjustment up or down to accommodate large items. The upper rack may be lowered by pushing the long flaps on each side of the rack. This will allow you to lower the rack (see fig. Upper Rack). To raise the rack, lift up on the rack until the rack locks in place.
CAUTION: A loaded upper rack may be heavier than anticipated. To prevent minor injury or damage to the contents, do not raise or lower the upper rack after the rack is loaded.
To add flexibility in loading, the utility shelf (on some models) may be placed in the up or down position or unfolded and placed in the lower unfolded position. The shelf may also be used to secure stemware such as wine glasses. Because these stemware items come in various sizes, slowly push the rack in to ensure the items do not bump into the edges of the dishwasher, which may cause damage to the items.
The fold down tines (on some models) provide flexibility for extra-large and hard-to-fit items. The tine rows can be adjusted to a vertical or lay-down position.
For best dishwashing results, follow these loading guidelines. Features and appearance of racks and silverware baskets may vary from your model.
8 Place Settings - Upper Rack
Models - GDT580, GDT680, PDT720, GDT740, PDT750 & CDT725
10 Place Settings - Upper Rack
Models - GDT580, GDT680, PDT720, GDT740, PDT750 & CDT725
12 Place Settings - Upper Rack
Models - GDT580, GDT680, PDT720, GDT740, PDT750 & CDT725
For best dishwashing results, follow these loading guidelines. Features and appearance of racks and silverware baskets may vary from your model.
Lower Rack
The lower rack is best used for plates, saucers and cookware items. Large items, such as broiler pans and baking racks should be placed along the sides of the rack. If necessary, oversized glasses and mugs can be placed in the lower rack to maximize loading flexibility. Plates, saucers and similar items should be placed between the tines in the direction that allows the item to remain secure in the rack.
The lower rack fold down tines (on some models) can be adjusted to different upright angles or placed flat to provide flexibility for hard-to-fit or extra-large items.
NOTE: Do not load large items in the lower rack where they may block the wash jets from rinsing out the detergent dispenser.
The reversible tine blocks (on some models) are designed to allow greater flexibility in loading dishes. The direction of the tine blocks can be changed to match your preferred loading direction as shown in Figure A or Figure B:
To adjust the tine block direction, remove the clips securing the tine blocks to the racks by pulling up on the tab, then gently flex the retaining wire from the center to unseat the tine block from the lower rack. The tine block may be turned in the opposite direction to reverse loading direction. Secure the tine block to the rack using the same process and be sure to snap the clips back in place.
WARNING! The clips can be a choke hazard for small children if removed from the dishwasher. Keep out of reach of children.
To change the direction of the fold down tines, lower the tines, then pull away from the bar clips that secure the tines to the rack and remove. Reverse the direction of the tines, orienting the handle on the opposite side of the rack. Reattach the tines to the bar clips by pushing the tines back until they click in place. The indexer will also need to be switched to the opposite side of the dishwasher. To remove the indexer, simply slide it the in the direction labeled “unlock.” Then, align the indexer with the rack on the other side and slide in the direction that says “lock” in order to reattach the indexer to the rack.
IMPORTANT: It is important to ensure that items do not protrude through the bottom of the rack or the silverware basket where they will block the rotation of the lower spray arm. Also, ensure that large plates, pots, or tall items don’t hit the mid spray arm. This could result in noise during operation and/or poor wash performance.
8 Place Settings - Lower Rack
Models - GDT580, GDT680, PDT720, GDT740, PDT750 & CDT725
10 Place Settings - Lower Rack
Models - GDT580, GDT680, PDT720, GDT740, PDT750 & CDT725
12 Place Settings - Lower Rack
Models - GDT580, GDT680, PDT720, GDT740, PDT750 & CDT725
For best dishwashing results, follow these loading guidelines. Features and appearance of racks and silverware baskets may vary from your model.
3rd Rack (on some models)
The 3rd rack is the recommended location for silverware and may have 1 or 2 trays (depending on model). The tray(s) may be removed by fully extending the 3rd rack, grasping both the front and back handles and gently lifting out of the rack. For racks with 2 trays, ensure the deepest part of the trays are toward the center of the rack.
CAUTION! Take care when loading, unloading, or transporting the silverware or utensil trays. The trays may contain sharp or heavy items. If items are dropped from the trays or the trays are dropped, injury could occur.
IMPORTANT NOTES:
- Do not allow cutlery of different materials to touch each other in the 3rd rack. Doing show may cause discoloration of the cutlery.
- The trays are only meant to be used with a GE 3rd rack dishwasher to hold silverware, cooking utensils, and other small items. Using the trays for any other purpose could result in damage to the trays or damage to anything interacting with the trays.
- Ensure that the 3rd rack is fully closed before shutting the dishwasher door. Shutting the door with the rack partially extended could cause damage to the dishwasher.
2-Tray 3rd Rack
8 Place Settings
10 Place Settings
12 Place Settings
1-Tray 3rd Rack
8 Place Settings
10 Place Settings
12 Place Settings
The 3rd rack is also removable to allow extra large items to be placed in the upper rack:
To remove the 2-tray 3rd rack:
- Remove silverware tray - see previous page.
- Push the rack all the way to one side so that a gap between it and the side rail forms on the other side. Align the side rail posts with the center of the clips on the rack and lift straight up.
- Continuing to hold the rack in the lifted position, repeat on the other side.
- Once the rack is removed, push the side rails all the way back into the dishwasher.
To remove the 1-tray 3rd rack:
- With the rack fully extended, lift the front of the rack so that the rack roller wheels clear the retaining hook.
- Continue to pull the rack until the remaining rack roller wheels clear the retaining hook.
- Replace the rack by aligning the rack roller wheels on the retaining hook and rack rails Ensure all roller wheels are located on top of the rack rails.
Silverware Basket
Place flatware in the removable silverware baskets. Sharp objects, such as forks and knives, may be placed with the handles facing up, in order to protect your hands. For the best wash performance, place other items such as spoons with the handles facing down. Avoid allowing items to nest together, which may keep them from being properly washed. When loading, distribute items evenly in the basket.
The silverware baskets may also be used for small items, such as measuring spoons, baby bottle nipples, plastic lids, or corn cob holders. The silverware basket covers can be closed to contain small items.
The Easy Access Silverware Baskets (on GDF570 and DDT575 models) may be positioned on the front of either the upper or lower racks. Secure the basket to the rack using the wire loop on the front of the upper and lower racks to engage the tabs on the rear of the basket.
On other models, the silverware basket may be positioned by placing the hooks on the back of the basket over the top wire on the sides of the lower rack.
IMPORTANT NOTE: Do not load large or tall utensils where they may block the detergent dispenser, mid spray arm, or become trapped between the door and the gasket when the door is closed.
Silverware/flatware is loaded using the silverware basket lids. This ensures great wash performance of the silverware. Loading in this manner prevents nesting and makes sure all items are washed uniformly.
Silverware Basket - 8 Place Settings Models - GDT580, GDT680, PDT720, GDT740, PDT750 & CDT725
Silverware Basket - 10 Place Settings Models - GDT580, GDT680, PDT720, GDT740, PDT750 & CDT725
Silverware Basket - 12 Place Settings Models - GDT580, GDT680, PDT720, GDT740, PDT750 & CDT725
Care and cleaning
Cleaning the Exterior Door Panel
Before cleaning the front panel, make sure you know what type of panel you have. Refer to the last two letters of your model number. You can locate your model number on the left-hand tub wall just inside the door. If your model number ends with BB, CC, WW, SA or ES then you have a painted door panel. If your model number ends with SS, then you have a Stainless Steel door panel. If your model number ends with II, then you have an Integrated door panel.
Follow the instructions below for cleaning the door panel for your specific model.
Painted Door Panel (model numbers ending in BB–black, CC–bisque, WW–white, SA-silver or ES-slate)
Use a clean, soft, lightly dampened cloth, then dry thoroughly.
Stainless Steel Door Panel (model numbers ending in SS)
For cleaning rust and tarnish, cleaners with oxalic acid such as Bar Keepers Friend Soft Cleanser™ will remove rust, tarnish and small blemishes. Use only a liquid cleanser free of grit and rub in the direction of the brush lines with a damp soft sponge. Do not use appliance wax or polish on the stainless steel.
For other blemishes and marks, use Stainless Steel Magic or a similar product using a clean soft cloth. Do not use appliance wax, polish, bleach or products containing chlorine on Stainless Steel. You can order Stainless Steel Magic # WX10X29 through GE Parts by calling 877.959.8688. In Canada, call 1-800-661-1616.
Integrated Door Panel (model numbers ending in II) This is a custom installed door panel, and you will need to refer to the cabinet manufacturers recommendations for proper cleaning.
Cleaning the Control Panel
To clean the control panel, use a lightly dampened cloth. Then dry thoroughly.
Cleaning the Dishwasher Interior
To clean and de-odorize your dishwasher, use citric acid or Lemi Shine®*, a detergent additive. Lemi Shine will break up mineral deposits, and remove hard water film and stains. You can order citric acid #WD35X151 through GE Parts by calling 877-959-8688. In Canada, call 1-800-661-1616. You can purchase Lemi Shine at your local grocery store or by calling GE at the numbers above and ask for WX10X10019.
Stainless Steel Inner Door and Tub
The stainless steel used to make the dishwasher tub and inner door provides the highest reliability available in a GE dishwasher.
If the dishwasher tub or inner door should be scratched or dented during normal use, they will not rust or corrode. These surface blemishes will not affect their function or durability.
Cleaning the Filters
Inspect and clean the filters periodically. This should be done every other month or so depending on usage. If there is a decrease in wash performance or dishes feel gritty, this is also an indication the filters need to be cleaned.
Ultra-Fine Filter
To clean the Ultra-Fine Filter, remove the bottom rack. Twist counterclockwise and remove the Ultra-Fine Filter. Rinse filter with warm soapy water and use a sponge to carefully remove any stubborn particles. Scrubbing with scouring pads or brushes can damage the filter. Once cleaned, replace the Ultra-Fine Filter, and twist clockwise to lock in place.
Fine Filter
To clean the Fine Filter (mesh plate), remove the bottom rack. Remove the Ultra-Fine Filter.
Twist counterclockwise each of the two retaining posts located toward the back bottom of the tub, and remove the Fine Filter. Rinse filter with warm soapy water. Scouring pads or brushes can scratch the filter surface but a soft brush or sponge may be needed to remove stubborn soils or calcium deposits caused by hard water. Once cleaned, replace the Fine Filter, the Ultra-Fine Filter, and twist clockwise the two retaining posts into place.
WARNING! The retaining posts can be a choke hazard for small children if removed from the dishwasher. Keep out of reach of children.
Protect Against Freezing
If your dishwasher is left in an unheated place during the winter, ask a service technician to:
- Turn off electrical power to the dishwasher. Remove fuses or trip circuit breaker.
- Turn off the water supply and disconnect the water inlet line from the water valve.
- Drain water from the water inlet line and water valve. (Use a pan to catch the water.)
- Reconnect the water inlet line to the water valve.
Does Your Dishwasher Have an Air Gap?
An air gap protects your dishwasher against water backing up into it if a drain clogs. The air gap is not a part of the dishwasher. It is not covered by your warranty. Not all plumbing codes require air gaps, so you may not have one.
Check the air gap any time your dishwasher isn’t draining well.
The air gap is easy to clean.
- Turn off the dishwasher and lift off the air gap cover.
- Remove the plastic cap under the cover and clean with a toothpick.
- Replace the cap and cover when the air gap is clean.
Troubleshooting
Problem |
Possible Causes | What To Do |
---|---|---|
Start status indicator light flashing | The door was opened or the cycle was interrupted. |
|
Dishwasher BEEPS once every minute |
This is a reminder that your dishwasher door has been left open during operation. It will continue beeping until you press Start and close the door. |
|
Beeping at the end of the cycle (on some models) | This is normal. The dishwasher will beep twice at the end of the cycle. |
|
Dishes and flatware not clean |
Ultra Fine or Fine filter is clogged |
|
Low inlet water temperature |
|
|
Water pressure is temporarily low |
|
|
Air gap or disposer is clogged |
|
|
Improper rack loading |
|
|
Poor performing detergent |
|
|
Spots and filming on glasses and flatware | Extremely hard water |
|
Low inlet water temperature |
|
|
Overloading or improper loading of the dishwasher |
|
|
Old or damp powder detergent |
|
|
Rinse agent dispenser empty |
|
|
Too little or low performing detergent |
|
|
Cloudiness on glassware | Combination of soft water and too much detergent |
|
Low performing phosphate free detergent |
|
|
Water temperature entering the dishwasher exceeds 150°F (66°C) |
|
|
Suds in the tub |
Wrong detergent
|
|
Rinse agent was spilled |
|
|
Detergent left in dispenser cups | Dishes or utensils are blocking the detergent cup |
|
Black or gray marks on dishes |
Aluminum utensils have rubbed against dishes |
|
Dishes don’t dry | Low inlet water temperature |
|
Rinse agent dispenser is empty |
|
|
Additional drying time is needed |
|
|
Control panel responded to inputs but dishwasher never filled with water |
Door may not be completely closed. |
|
Water valve may be turned off |
|
|
Flood float may be stuck |
|
|
Stained tub interior | White film on inside surface-hard water minerals |
|
Dishwasher won’t run | Fuse is blown or circuit breaker is tripped |
|
Power is turned off |
|
|
Control panel is locked |
|
|
Possible leak is detected |
|
|
Proper Start sequence was not followed |
|
|
Control panel lights go off when you’re setting controls | Time too long between touching of selected buttons |
|
Water standing in the bottom of the tub | Air gap is clogged |
|
High drain loop or air gap not installed |
|
|
Water won’t pump out of the tub | Drain is clogged |
|
Steam | This is normal |
|
Sanitized or Cycle Sanitized light does not illuminate at the end of the cycle |
The door was opened and the cycle was interrupted during final rinse |
|
The incoming water temperature was too low |
|
|
Noise |
Normal operating sounds: Detergent cup opening Water entering dishwasher The motor stops and starts at various times during the cycle Spray arms start and stop at various times Drain pump sounds during pump out Drain pump starts and stops several times during each drain |
|
Rattling dishes when the spray arm rotates |
|
|
Rattling silverware against door during wash |
|
|
A white film on glassware, dishware and the interior |
This problem is likely caused by a low quality phosphate-free dishwasher detergent |
|