Loading ...
Loading ...
Loading ...
PROGRAMMING HOMELINK姞
If you have any questions or are having difficulty
programming your HomeLink姞 buttons, refer to
the HomeLink姞 web site at: www.homelink.com
or call 1-800-355-3515.
NOTE:
It is also recommended that a new battery
be placed in the hand-held transmitter of
the device being programmed to
HomeLink姞 for quicker programming and
accurate transmission of the radio-
frequency.
1. Position the end of your hand-held transmit-
ter 1–3 inches (2–8 cm) away from the
HomeLink姞 surface, keeping the HomeLink姞
indicator light
䊊
1
in view.
2. Using both hands, simultaneously press and
hold the desired HomeLink姞 button and
handheld transmitter button. DO NOT re-
lease until the HomeLink姞 indicator light
䊊
1
flashes slowly and then rapidly. When the
indicator light flashes rapidly, both buttons
may be released. (The rapid flashing indi-
cates successful programming.)
NOTE:
Some devices may require you to replace
Step 2 with the cycling procedure noted in
the “Programing HomeLink姞 for Canadian
customers and gate openers” section.
3. Press and hold the programmed HomeLink姞
button and observe the indicator light.
● If the indicator light
䊊
1
is
solid/continuous, programming is
complete and your device should acti-
vate when the HomeLink姞 button is
pressed and released.
● If the indicator light
䊊
1
blinks rapidly for
two seconds and then turns to a
solid/continuous light, continue
with Steps 4-6 for a rolling code device.
A second person may make the following
steps easier. Use a ladder or other device.
LIC2365 LIC2366
Instruments and controls 2-59
Loading ...
Loading ...
Loading ...