Loading ...
Loading ...
Loading ...
-8-
IN ADDITION TO THE OTHER WARNINGS CONTAINED IN THIS
MANUAL OBSER
VE THE FOLLOWING FOR SAFE OPERATION
• Use the BOSTITCH pneumatic tool only for the purpose for which it was designed.
• Never use this tool in a manner that could cause a fastener to be directed toward the user
or others in the work area.
• Do not use the tool as a hammer.
• Always carry the tool by the handle. Never carry the tool by the air hose.
• Do not alter or modify this tool from the original design or function without approval from
BOSTITCH.
• Always be aware that misuse and improper handling of this tool can cause injury to
yourself and others.
• Never clamp or tape the trigger or contact trip in an actuated position.
• Never leave a tool unattended with the air hose attached.
• Do not operate this tool if it does not contain a legible WARNING LABEL.
• Do not continue to use a tool that leaks air or does not function properly. Notify your nearest
Bostitch representative if your tool continues to experience functional problems.
“DIAL-A-DEPTH™” FASTENER CONTROL ADJUSTMENT
T
he DIAL-A-DEPTH™ Fastener Control adjustment feature provides close
c
ontrol of the fastener drive depth: from flush with the work surface to
shallow or deep countersink. First, set the air pressure for consistent
d
rive in the specific work as described on page 4, then use the
D
IAL-A-DEPTH™ Fastener Control adjustment to give the desired
depth of drive.
Loading ...
Loading ...
Loading ...