Loading ...
Loading ...
Loading ...
Pre-operation checks
141
To check the operation using the multi-func-
tion display:
(1) Tap the “Navigation” light button on the
system control screen. Check that the
bow light and anchor light come on when
the button is blue and that both lights go
off when the button is gray.
(2) Tap the “Anchor” light button on the sys-
tem control screen. Check that only the
anchor light comes on when the button is
blue and that the anchor light goes off
when the button is gray.
1 “Navigation” light button
2 “Anchor” light button
Horn check
Push the horn switch/button and check that
the horn sounds.
AR210 / SX210
1 Horn switch
212X / 212S / 212
1 Horn button
Engine shut-off cord (lanyard) check
Make sure that the engine shut-off cord (lan-
yard) is not damaged. If the cord is damaged,
replace it. WARNING! Never try to repair
the engine shut-off cord (lanyard) or tie it
together. The engine shut-off cord (lan-
yard) may not pull free when the operator
falls off, allowing the boat to continue to
run and cause an accident.
Post-launch checks
Perform the post-launch checks in the pre-
operation checklist while the boat is in the
water and the engines are running.
Engine shut-off switch check
Check the engine shut-off switch for proper
operation.
Dock
Interior
Navigation
Anchor
Ballast
Blower
Bilge
21
BILGE
NAVI
ANC
HORN
CTSY
LIGHTS
1
HORN
1
SportsBoat_F3R13.book Page 141 Friday, May 31, 2019 9:42 AM
Loading ...
Loading ...
Loading ...