Loading ...
Loading ...
Loading ...
EN 15
Faults table
If the appliance does not work properly, this does not always mean that
it is defective. Try to deal with the problem yourself first by checking
the points mentioned below in the table or contact the Asko service
department (see guarantee card).
FAULT CAUSE SOLUTION
There is a smell of gas in the
vicinity of the appliance.
The gas connection of the gas
hob is leaking.
Turn off the gas mains.
Contact your gas fitter.
A burner does not ignite. Plug not in socket.
Fuse defective/fuse in meter
cabinet switched off.
Sparkplug dirty/damp.
Burner parts not correctly
installed.
Burner parts dirty/damp.
Main gas tap closed.
Fault in the gas network.
Gas bottle or tank is empty.
Wrong type of gas used.
Push the plug into the
socket.
Fit a new fuse or switch the
automatic fuse back on.
Clean and dry the sparkplug.
Assemble the burner parts
using the centring ridges.
Clean and dry the burner
parts, making sure that the
outflow holes are open.
Open the main gas tap.
Check with your gas
supplier.
Connect a new gas bottle or
have the tank filled.
Check that the gas used is
suitable for the appliance. If
not, contact your gas fitter.
TROUBLESHOOTING
Loading ...
Loading ...
Loading ...