Loading ...
Loading ...
Loading ...
22
GB
Replacing the Triple ring burner nozzles*
1. Remove the pan supports and lift the burners out of their housing. The
burner consists of two separate parts (see pictures).
2. Unscrew the nozzles using a 7 mm socket spanner. Replace the nozzles
1). The two nozzles have the same hole diameter.
3. Replace all the components by completing the above operations in reverse
order.
2. Remove the knob and adjust the adjustment
screw, which is positioned in or next to the tap
5. Once the adjustment has been made, replace the seals on the by-passes
using sealing wax or a similar substance.
!
fastened as tightly as possible.
!
indicating the new type of gas used. Stickers are available from any of our
Service Centres.
! Should the gas pressure used be different (or vary slightly) from the
inlet pipe (in order to comply with current national regulations).
Electrical
connections
DATA PLATE
see data plate
This appliance conforms to the following
European Economic Community directives:
- 2006/95/EEC dated 12/12/06 (Low
Voltage) and subsequent amendments
- 2004/108/EEC dated 15/12/04
(Electromagnetic Compatibility) and
subsequent amendments
- 93/68/EEC dated 22/07/93 and
subsequent amendments.
- 2009/142/EEC dated 30/11/09 (Gas) and
subsequent amendments.
- 2012/19/EC and subsequent
amendments.
* Only available on certain models.
Loading ...
Loading ...
Loading ...