Loading ...
Loading ...
Loading ...
4
PRECAUTIONS TO TAKE
ꔛ
Use the remote control within the
maximum communication distance (10 m,
32.8 ft). Using the remote control beyond
this distance, or with an object
obstructing it, may cause a
communication failure.
ꔛ
A communication failure may occur due to
nearby devices. Electrical devices such as
a microwave oven or wireless LAN
product may cause interference, as this
will use the same bandwidth (2.4 GHz) as
the Magic Motion Remote Control.
ꔛ
The Magic Motion Remote Control may
be damaged or may malfunction if it is
dropped or receives a heavy impact.
ꔛ
When playing a game using the Magic
Motion Remote Control, hold it securely
by wrapping its strap around your wrist
and adjusting the length with the
adjustable ring.
ꔛ
Take care not to bump into nearby
furniture or other people when using the
Magic Motion Remote Control.
ꔛ
It is recommended that your wireless
access point be located more than 1 m
(3.28 ft) away from the TV. If the AP is
installed closer than 1 m, the magic
motion remote control may not perform
as expected due to frequency
interference.
REGISTERING
The Magic Motion Remote Control
operates by pairing with your TV.
How to register the Magic Motion
Remote Control
To register the remote control,
press the ENTER (or OK) button
on the remote control while
aiming it at your TV.
How to Re-register the Magic
Motion Remote Control after
Registration Failure
Reset the remote control by
pressing and holding both the
ENTER (or OK) and MUTE
buttons for 5 seconds. (Once the
reset is complete, the light on
the Pointer blinks.) Then repeat
the above procedure to register
the remote control.
OK
OK
OK
MUTE
ENTER
ENTER
ENTER
You can move the pointer by
aiming the front of the remote
control at your TV then move it
left, right, up or down.
If the pointer does not work
properly after clicking the ENTER
(or OK) button, wait for 10
seconds then use it again.
Press ENTER (or OK) button if
there is no pointer on your TV
screen. The pointer will appear
on the screen.
If the pointer has not been used
for a certain period of time, it will
disappear.
HOW TO USE
Loading ...