Loading ...
Loading ...
Loading ...
Operating Instructions
WARNING: DO NOT operate the humidier without water in the tank.
WARNING: NEVER lift the tank off the Base while the unit is operating.
ON/OFF – Plug into a standard (120V AC) electrical outlet. The LED Display will turn
on for 2 seconds then turn OFF. Press the ON/OFF button once and the “Operating”
indicator will turn on. Mist may not appear immediately; allow up to 15 minutes for the
water in the tank to transfer to the Base.
Beep/Dim – The humidier automatically defaults to an audible beep when
changing settings, the waterless indicator will illuminate and you will hear three
beeps when the humidier is out of water and the LED Display will be illuminated.
To disable one or more of these settings, follow the steps below:
Press Beep/Dim once to disable all sound (Beep Off will ash on the display three
times and then will remain on the display to indicate the sound is off). Press the
button twice to turn the LED Display OFF (sound will remain off) and Press a third
time to enable the LED Display and the sound (default function).
LOW Water – When the tank is out of water the “waterless” indicator will appear in
the display, you will hear three beeps and the automatic safety shut-off will turn the
Ultrasonic Nebulizer & unit OFF. Note: You can disable the audible beep by pressing the
Beep/Dim button once. To re-enable, press the Beep/Dim button two more times.
1
3
2
7
6
4
5
5
The Delay Start and Auto-Off buttons allow you to set the humidier to turn ON and OFF automatically as desired.
Delay Start – The Delay Start feature allows you to program the unit to turn ON
Automatically. To use, press the “Delay Start” button once; you will see “Delay
Start” 01:00H illuminated on the display. This feature works in one hour
increments and is programmable up to 24 hours. Simply keep pressing the Delay
Start button until you get to your desired delay start time, once you have reached
the time the display will ash three times and then will start to countdown until
the unit turns ON.
Auto-Off –
The Auto-Off feature allows you to run the humidier now and set it
to turn off at a specic time automatically (in 1 hour increments from 1-24 hours).
To use - press the “Auto-Off’ button once; you will see “Auto-Off” 01:00H illuminated
on the display. This feature works in one hour increments and is programmable up
to 24 hours. Simply keep pressing the Auto-Off button until you get to your desired
Auto-Off time, once you have reached the time the display will ash three times and
then start to count down until the unit turns OFF. The display will start alternating
between the current ambient humidity and the Auto-off Timer. NOTE: You can use
the Delay Start and Auto-Off functions together on this fully programmable LED
Display to program the humidier to turn ON and turn OFF at your desired times.
Mist Output
–
When you turn the unit ON, it will default to the lowest mist setting. Pressing
the “Mist” button each time will increase the output. Press once for Medium, twice for High, three
times for Supreme. Pressing the Mist button a fourth time will bring the unit back to Low
.
Humidistat – By using this feature the humidier will automatically monitor and
control the humidity level according to your desired setting. Once the desired humidity
level is reached the mist will shut OFF until the humidity drops below the setting and
then the mist will turn back ON automatically to maintain the humidity level desired. To
set this feature press the “Humidistat” button to your desired setting. Settings range
from 40%-95% RH (Relative Humidity) in 5% RH increments. A 40%-60% Relative
Humidity is recommended. Once you set your desired humidity, the number will blink
three times and then the display will revert back to the Relative Humidity. To view the
set humidity level, press the Humidistat button once.
Loading ...
Loading ...
Loading ...