Loading ...
Loading ...
Loading ...
5. Press SETUP to enter your choice. The next optional setting will be
displayed.
6. Repeat Steps 4 and 5 until you are done changing the optional
settings.
Clear MyKey威
To reset all MyKeys威 as admin keys, do the following:
1. Turn the vehicle on using the admin key.
2. Press SETUP until PRESS RESET TO CLEAR MYKEY is displayed.
3. Press and release the RESET button. HOLD RESET TO CONFIRM
CLEAR is displayed.
4. Press and hold the RESET button for two seconds until ALL MYKEYS
CLEARED is displayed.
Check MyKey威 system status
The vehicle system check will provide the status of the following MyKey威
parameters:
• MYKEY MILES — This odometer only tracks mileage when a MyKey威
is used. If mileage does not accumulate as expected, then the MyKey威
is not being used by the intended user. The only way to reset this
odometer to zero is by clearing MyKey威. If this odometer is lower than
the last time you checked, then the MyKey威 system has been recently
cleared.
• # MYKEY(S) PROGRAMMED — Indicates how many MyKeys威 are
programmed to the vehicle. Can be used to detect deletion of a
MyKey威.
• # ADMIN KEYS PROGRAMMED — Indicates how many admin keys
are programmed to the vehicle. Can be used to detect if an additional
spare key has been programmed to the vehicle.
Refer to Message center in the Instrument Cluster chapter for MyKey威
system warnings displays.
Using MyKey威 with remote start systems
MyKey威 is not compatible with non-Ford approved aftermarket remote
start systems. If you choose to install a remote start system please see
your authorized dealer for a Ford approved remote start system.
Locks and Security
103
2012 MKS (mks)
Owners Guide, 1st Printing
USA (fus)
Loading ...
Loading ...
Loading ...