Loading ...
Loading ...
Loading ...
en Appliance door
26
■ The hinges on the appliance door move when
opening and closing the door, and you may be
trapped. Keep your hands away from the hinges.
Removing panels
1. Open the appliance door fully.
2. Open the two locking levers on the left and right
(fig. !).
3. Close the appliance door fully ‚. Take hold of the
appliance door with both hands, one on the left and
one on the right ƒ, and pull it up and out (fig. ").
4. Set the appliance door down carefully on a level
surface.
5. Press the left- and right-hand sides of the cover
(fig.°#).
6. Remove the cover (fig. $).
7. Lift out each panel (fig. %) and set them down
carefully on a flat surface.
Clean the panels with glass cleaner and a soft cloth.
:Warning
Risk of injury!
■ Scratched glass in the appliance door may develop
into a crack. Do not use a glass scraper, sharp or
abrasive cleaning aids or detergents.
Risk of injury!
■ The hinges on the appliance door move when
opening and closing the door, and you may be
trapped. Keep your hands away from the hinges.
Fitting panels
1. Slide each panel back in and make sure that it is
sitting correctly at the bottom in the retainer (fig. !).
2. Push each panel in at the top (fig. ").
3. Put the cover back in place and press on it until you
hear it click into place (fig. #).
4. When fitting the appliance door, ensure that both
hinges are inserted straight into the opening (fig. $).
Place both hinges at the bottom on the panel and
use this as a guide.
Ensure that the hinges are inserted into the correct
opening. You must be able to insert them easily and
without resistance. If you can feel any resistance,
check that the hinges are inserted into the correct
opening.
5. Open the appliance door fully.
2
E
E
D
1
1
2
Loading ...
Loading ...
Loading ...