Loading ...
Loading ...
EN
3
5. SET THE DESIRED PROGRAMME
GUIDED MODE the button light will guide you
through setting your programme in the following order:
Selection of programme/temperature/spin speed/
options. As soon as you confirm a selection by pressing
the knob, the button light jumps to the next step.
• Select programme:
Make sure that the programme button lights up.
Turn the knob to select the desired programme.
The indicator next to the selected programme lights up.
Confirm the desired programme by pressing the knob.
• Change temperature, if required
If you want to change the temperature indicated on the
display, make sure that the Temperature button lights
up.
Turn the knob to select the desired temperature, then
press the knob to confirm.
• Change spin speed, if required
If you want to change the spin speed indicated on the
display, make sure that the Spin button lights up.
Turn the knob to select the desired spin speed, or Rinse
hold, then press the knob to confirm.
Refer to OPTIONS, FUNCTIONS AND INDICATORS for
more information.
• Select options, if required
If you want to select additional options, make sure that
the Options button lights up. The options which are
selectable for your programme are indicated by the
arrows which are lit up
.
Turn the knob to select the desired options. The symbol
for the selected option will flash. Press the knob to
confirm.
Some options/functions can be selected by pressing the
button directly:
Refer to the OPTIONS, FUNCTIONS AND INDICATORS
section for more information.
INDIVIDUAL MODE
After you have switched on the washing machine, you
are not forced to follow the GUIDED MODE.
The order in which you choose to set your programme is
up to you.
To make a setting, first press the relevant button, then
turn the knob to select, and finally press the knob to
confirm.
The range of temperatures, spin speeds and options
depend on the programme selected. It is therefore
recommended that you start by selecting the
programme.
6. ADD DETERGENT
• If you are not using the Dosing Aid function, pull out
the detergent dispenser and add detergent (and
additives/softener) now; observe the dosing
recommendations on the detergent pack.
If you have selected PREWASH or START DELAY,
observe the recommendations in the OPTIONS,
FUNCTIONS AND INDICATORS section. Then carefully
close the detergent dispenser.
• If you are using the “Dosing Aid” function, add
detergent later, after you have started the
programme. Refer to the OPTIONS, FUNCTIONS AND
INDICATORS section for more information.
• After having added detergent/additives, do not open
the detergent dispenser to avoid any overflow.
7. START PROGRAMME
• Press and hold “Start/Pause” until the button lights up
and stays on; the programme will start.
• If you have selected “Dosing Aid”, the washing
machine indicates the recommended detergent
amount for your laundry load after the programme
starts.
Follow the instructions as indicated in the OPTIONS,
FUNCTIONS AND INDICATORS/Dosing Aid section.
8. CHANGE THE SETTINGS OF A PROGRAMME
WHICH IS RUNNING, IF REQUIRED
You can still change the settings while a programme is
running.
The changes will be applied, provided the respective
programme phase has not yet finished.
• Press the relevant button (for example the “Spin speed”
button to change the spin speed). The selected value
will flash for a few seconds.
• While it is flashing, you can adjust the setting by
turning the knob. If the value stops flashing before you
have adjusted it, press the button again.
• Press the knob to confirm the new setting. If you do
not confirm it, the new setting will be confirmed
automatically: It will stop flashing.
The programme will continue automatically.
To change the settings of a programme which is
running, you can also:
• Press “Start/Pause” to pause the programme which is
running
• Change the settings as desired.
• Press “Start/Pause” again to continue the programme.
9. PAUSE A PROGRAMME WHICH IS RUNNING
AND OPEN THE DOOR, IF REQUIRED
• Press and hold “Start/Pause” to pause a
programme which is running.
• Provided the water level and/or temperature is/
are not too high, the door open indicator lights
up. You can open the door, for example to add/
remove laundry.
• Press “Start/Pause” to continue the programme.
10. RESET A PROGRAMME WHICH IS RUNNING,
IF REQUIRED
• Press and hold the “On/O” button until “rES”
appears on the display.
The water drains, the programme ends and the door
unlocks.
Loading ...
Loading ...
Loading ...