Loading ...
Loading ...
Loading ...
6
Safety information
This appliance must be used only on the Tefal® 5 SECONDS Chopper 500ml.
This appliance should never be used by children or by people with a disability which
would prevent them from using it safely.
This appliance is not a toy. Keep it out of the reach of children.
Use the appliance on a stable and dry working surface.
Avoid lling in more than half the container. - g. B
Set the locking system when closing the bowl.
The high quality blades of the cutting rotor are extremely sharp. Be very careful to
protect your ngers when you use them. Gloves are recommended.
Always use the cutting rotors in the adapted container with the lid closed.
This appliance is conceived for solid ingredients.
Do not operate the appliance if:
- the container is empty
- the blades of the cutting rotor are damaged
- there is visible damage on the appliance or it is not functioning properly
- if the mechanism is blocked.
Always store the cutting rotors in their protective case, when you do not use the
appliance.
This product is designed for household use and not professional use.
If it is used for professional purposes, the warranty will be void and no liability will be
assumed.
Using
1. Remove all the parts from the box and clean them thoroughly by hand before using for
the rst time. Please refer to the instructions under «Cleaning» section.
2. Place the container on a stable and dry working surface.
3. Remove the cutting rotor from its protective case.
4. Place the cutting rotor in the container with the blades above one another to optimize
the space for the ingredients you want to chop. - g. C, D
5. Cut the big ingredients such as carrots or onions in a piece shorter than the length of
the blades so that they will not block the blades of the cutting rotor.
6. Then place them in the container while making sure that the cutting rotor will remain
straight.
7. Place the lid on the container making sure that the hexagon on the cutting rotor ts
into the recess in the lid.
8. Place one hand on top of the lid to hold the appliance down on the working surface.
Then use the other hand to grip the pull mechanism on the lid.
9. The rst pulling motion needs to be done with strength and speed. Execute this
motion always in an horizontal way.
10. Maintain your grip while the pulling mechanism retracts and do not let it go.
11. If the blades of the cutting rotor become blocked, do not force. Remove the cutting
rotor to carefully remove the ingredients and cut them in smaller pieces before putting
back the cutting rotor in the container taking care of the alignment of the blades to
CST-13-17-000497B MANUAL_CHOPPER 500 Use&care.indd 6 10/08/2018 10:06
Loading ...
Loading ...
Loading ...