Loading ...
Loading ...
Loading ...
9
Installation
Before Using Your Wine Cooler
Remove the exterior and interior packing.
Before connecting the Wine Cooler to the power source, let it stand upright for
approximately 12 hours. This will reduce the possibility of a malfunction in the
cooling system from handling during transportation.
Clean the interior surface with lukewarm water and a soft cloth.
The cooler is specially designed for wine storage, please do not use for other
items.
Installation:
Where possible good ventilation should be around the units
Place your wine cooler on a flat floor that is strong enough to support the unit when
it is fully loaded. To level your Wine Cooler, adjust the front leveling leg at the bottom
of the Wine Cooler.
Locate the Wine Cooler away from direct sunlight and sources of heat (stove, heater,
radiator, etc.). Extreme cold ambient temperatures may also cause the unit not to
perform properly.
Avoid locating the unit in moist areas.
Plug in the proper power socket
Please also read „Warnings‟ Page of this manual
Loading ...
Loading ...
Loading ...