User Manual Teka TCD70 7kg Condenser Dryer

No self-cleaning function available the condenser plate would need to be removed manually which is located at the front left-hand side then rinsed under water to remove any debris and then replaced back into the condenser slot this would be done every couple of months very quick and easy to do.

Condenser & heat pump condenser dryers are NOT able to be wall-mounted as they are too heavy for the walls, they're able to be placed on the floor, on a solid benchtop or placed on top of front load washer be sure to check your washers measurements that you have enough depth for the dryer to be placed on top.

In order to use a stacking kit they need to be matched appliances from the same brand. The best option here would be to place them side by side on the floor or to built a cabinet to support the dryer above the washer separately.

If you plan on stacking a dryer on top of a front load washing machine, make sure that the width and depth of the dryer is less than that of the washing machine underneath.