Loading ...
Loading ...
Loading ...
1. Squeeze the clips, arrows, and remove the
bulb holder.
2. Pull off the bulb and replace it.
3. Insert the new bulb and bulb holder in re‐
verse order.
4. Re-engage the bulb holder so that it audi‐
bly clicks into place.
John Cooper Works: aerodynamic bumper
The lamps are accessed via the rear side or the
underside of the bumper.
1.
Remove the bulb holder by turning it coun‐
terclockwise, arrow.
2. Pull off the bulb and replace it.
3. Insert the new bulb and bulb holder in re‐
verse order.
License plate lamps
5-watt bulb, C 5 W
Replacing
1. Push the lamp to the left in the catch of the
lamp housing using the screwdriver, ar‐
row 1.
2. Take out the lamp, arrow 2.
3. Replace the bulb.
4. Insert the lamp.
Center brake lamp
This lamp uses LED technology for operation.
Contact your service center in the event of a
malfunction.
Changing wheels
Notes
Wheel change for run-flat tires:
▷ Prepare for the wheel change, refer to
page 251.
▷ Jack up the vehicle, refer to page 251.
▷ Tighten the lug bolts, refer to page 252.
Compact wheel
Wheel change with a compact wheel:
▷ Remove the compact wheel, refer to
page 250.
▷ Prepare for the wheel change, refer to
page 251.
▷ Jack up the vehicle, refer to page 251.
▷ Mount the compact wheel, refer to
page 251.
Seite 249
Replacing components
Mobility
249
Online Edition for Part no. 01 40 2 911 498 - VI/13
Loading ...
Loading ...
Loading ...