Loading ...
Loading ...
Loading ...
To Slice
1. Plug cord into 120V, AC outlet. Push excess cord into the
cord storage compartment (Fig. 3).
Cord Safety: A short power cord is provided with this appliance
to reduce the possibility of someone becoming entangled in
it or tripping over it. While EdgeCraft does not recommend it,
extension cords may be used. Use only 3-wire extension cords
with 3 prong plugs. Extension cords should have an electrical
rating not less than the rating on the electrical appliance.
Do not use damaged extension cords. Keep cord away from
heat, sharp edges and water.
2. Place food in the corner of the carriage and pull the
carriage toward you. Hold food pusher with your right hand,
keeping thumb protected behind thumb guard (Fig. 4).
3. Press the “ON” side of the switch down for slicing.
4. To slice, slide the carriage toward the blade. Move the
carriage back and forth steadily. Using the food pusher,
keep food pressed against the thickness guide plate for
even slices. When finished slicing, turn off motor, unplug
slicer, set the slice thickness to “0” (not below “0”) and
secure the carriage in the “Lock” position (Fig. 1).
Cleaning
Unplug the slicer cord from outlet
Slicer parts in contact with food can be removed from
thorough cleaning. Wash with a soft cloth or sponge and
a mild soap or spray cleaner. Rinse and dry.
Never use steel wool or scouring powder on any part of slicer.
DO NOT IMMERSE SLICER IN WATER. DO NOT WASH ANY
PART OF THE SLICER IN DISHWASHER.
6
Figure 3. Push excess cord into the cord
storage compartment.
Figure 4. Hand on food pusher, slicing.
Figure 5. Removing the food carriage.
Loading ...
Loading ...