Loading ...
Loading ...
Loading ...
41
4
Press the shutter button
completely.
s The mirror will lock up and the shutter
will open.
5
Cleaning the CMOS Sensor
¡Use a rubber blower to carefully blow
away any dust on the surface of the
CMOS sensor.
6
Exit the sensor cleaning.
¡Turn the <4> switch to <2>.
s The camera will turn off, the shutter
will close, and the mirror will go back
down.
¡Set the <4> switch to <1>. The
camera will be ready to shoot.
¡ Be sure not to turn off the camera while cleaning the CMOS sensor. If the
power is turned off, the shutter will close and the shutter curtains might
be damaged.
¡ Use a blower not attached with a brush. The brush can scratch the
CMOS sensor.
¡ Do not insert the blower tip inside the camera beyond the lens mount. If
the power goes out, the shutter curtains will close and the blower tip may
damage then.
¡ Never use canned air or gas to clean the sensor. The blowing force can
damage the sensor or the spray gas can freeze on the sensor.
Loading ...
Loading ...
Loading ...