Loading ...
Loading ...
Loading ...
7
GB
F
SA
FA
ZHS
KO
TH
Environment
Environment protection first !
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.
If there is a problem?
Problem Possible causes Solutions
• Water drips from the
holes in the soleplate.
• You are using the Shot of Steam button too often.
• You have stored the iron horizontally, without
emptying it and without setting it to DRY.
• Wait a few seconds between each use
of the button.
• See the section "Storing your iron".
• Brown streaks come
through the holes in
the soleplate and
stain the linen.
• You are using chemical descaling agents.
• You are using pure distilled/demineralised or
softened water.
• Your linen is not rinsed sufficiently or you have
ironed a new garment before washing it.
• Do not add any descaling agents to
the water in the water tank.
• See section “Types of water not to use?”.
• See section "Cleaning the soleplate".
• Ensure linen is rinsed thoroughly to
remove any soap deposits or
chemicals on new garments which
may be sucked up by the iron.
• The soleplate is dirty
or brown and can
stain the linen.
• You have ironed with an unsuitable
programme (temperature too high).
• You are using starch.
• Select the appropriate program.
Refer to the chapter “Clean the
soleplate“
• Spray starch on the underside of the
fabric to be ironed.
• There is little or no
steam.
• The water tank is empty.
• The anti-calc valve is dirty.
• Your iron has a build-up of scale.
• Your iron has been used dry for too long.
• Fill it.
• Clean the anti-calc valve.
• Clean the anti-calc valve and carry out
a self-clean.
• Carry out a self-clean.
• Wait for the soleplate to reach the
correct temperature.
• The soleplate is
scratched or
damaged.
• You have placed your iron flat on a metallic
rest-plate or ironed over a zip.
• You have cleaned your soleplate with an
abrasive or metal pad.
• Always set your iron on its heel.
• Try to avoid ironing over zips.
• Refer to the chapter “Clean the
soleplate”.
• Water is leaking out
through the water
tank cover.
• You have not closed the water tank cover
properly.
• Make sure the water tank cover has
clicked shut.
• Steam or water come
from the iron as you
finish filling the tank.
• The steam control is not set to the DRY
position .
• Check that the steam control is
set to the DRY position .
• The spray and/or shot
of steam do not work.
• The water is empty. • Fill the water.
• Water leaks out of the
front of the iron.
• You have exceeded the level MAX when filling
the water tank.
• Empty the surplus water out of the
water tank.
If you have any problem or queries, please contact our
Customer Relations team first for expert help and advice.
845 602 1454 - UK / (01) 677 4003 - Ireland
or consult our website - www.tefal.co.uk
Name of manufacturer : CALOR S.A. 3.12 104
220-240V a.c. 2010-2400W
220-240 V a.c. 2185-2600W
50/60Hz
Made in France
1800116881 FTH GB/ASIE:1800116881 FTH GB/ASIE 2/07/09 11:45 Page 7
Loading ...
Loading ...
Loading ...