Loading ...
Loading ...
Loading ...
Function of each Button
14
NOTE
* For optimizing the washing algorithm, the displayed time may change during washing-increased by a maximum
of 10 minutes (not including spin irregularity correction time) or decrease by a maximum of 4 minutes.
* The Vapour Mode option cannot be used with all cycles.
* Vapour may not be clearly visible during the Vapour Mode cycles.
This is normal. Too much vapour could damage clothing.
* Do not use Vapour Mode with delicate fabrics such as wool, silk, or easily discolored fabrics.
Intensive Wash button
Vapour Mode button
Hot and cold wash laundry button
Water Level button and
Detergent amount indicator
Remaining wash, reservation
time, and error message display
• Laundry progress is indicated here.
• A flashing indicator means that the
process is in operation, an indicator
which is on but not flashing means
it is awaiting that process and
process indicators that are not lit
means that the process is complete
or was not selected.
• Allows a higher agitation
intensity.
• It is set to Medium intensity
by default (Select is off.)
Select Intensive Wash by
pressing the button. (Can be
set on all courses except
Delicates, Allergy Care,
Quiet Wash and Tub Clean.)
• Vapour Mode can be selected
with the Stain Care and
Cotton Wash courses.
It increases the wash
temperature to 60Deg C for
a short period of the wash
cycle.
• Vapour Mode is automatically
selected with the Allergy
care course.
Time Delay
(Reservation) button
• Use for laundry
reservation.
• To cancel, press
the power button.
(refer to page 25)
•
To select hot water, cold water, or warm water washing.
•
Can be changed during operation.
•
If hot wash is selected, laundry will be done with hot water and rinse will
be done with cold water..
•
The preset water temperature for Delicates is Cold water only.
(The laundry can be damaged if Hot water is used)
•
Warm water (Hot + Cold Wash)is automatically selected on the Stain care,
Allergy Care, Extra Rinse and Tub Clean cycles.
• Press to manually select
the Water Level.
• It can be changed during
operation.
• Detergent indicator
suggests the recommended
powdered detergent
amount to add.
• During operation this indicates the
remaining wash time.
• If there is a malfunction, the error
message will be displayed to assist
in troubleshooting the problem.
Wash Status display
MFL69022796(영)호주향_150x210 16. 3. 25. 오전 9:39 페이지 14
Loading ...
Loading ...
Loading ...