Loading ...
Loading ...
Loading ...
\
08
Through your wall
\Installation Instructions\
Further to your various ducting options, below are some tips on how to
correctly duct your rangehood:
– Always use correctly sized ducting – DO NOT reduce the size of the ducting
– Always use solid ducting
– Always use non-flammable ducting
– Always duct to the outside atmosphere
– Do not use flexible ducting
– Do not duct into the ceiling space- always vent to the outside atmosphere.
– Avoid sharp 90 degree bends as much as possible, use 45 degree bends
instead wherever possible
– Duct to the outside atmosphere using the shortest duct run possible
– Use cylindrical ducting whenever possible
Positioning the rangehood Installation heights
– Over gas and electric cookers, Residentia Group recommends our
rangehoods to be mounted at a height of between 600-800mm above the
cooking surface.
– Electric cooktops must have a minimum height of 600mm from the
underside of the rangehood to the cooktop face.
– Gas cooktops must have a minimum of 650mm from the burner to the
underside of the rangedhood.
– Over open flame grillers or barbecues, the Gas Regulations require the
filters of the rangehood to be at least 1200mm above the cooking surface.
Installing the rangehood – Once you’ve determined your installation height, install the mounting
bracket (hook) on to the wall ensuring that it’s secured in a level position.
The mounting bracket connects to the canopy at the top (i.e. where the
chimney connects into the canopy). Also install the wall bracket for the
chimney pieces. (2)
– Attach the expandable 150mm ducting adapter to the canopy. With the two
Chimney pieces together, fix the “outside chimney” bracket onto the outside
chimney (flue) piece. Ensure that the inner chimney piece can move freely
inside. Now attach the chimney pieces to the canopy. (3)
– Lift the canopy (including the chimney pieces) on to the wall bracket
(hook). (4)
– Adjust the height of the inside chimney piece and fix into place with the
screws. After adjusting the position of the canopy, fix into place with the
safety screws into the wall (you’ll need to remove the grease filters first).
Screw
(ST4mm x 30mm)
Screw
(ST4mm x 30mm)
Screw
(4mm x 8mm)
(ST4mm x 30mm)
Warning: Failure to install the screws or fixing device in accordance
with these instructions may result in electrical hazards.
The warning shall be in the same part of the instructions that include
details of how to mount the equipment.
Loading ...
Loading ...
Loading ...