Loading ...
Loading ...
Loading ...
14
ENSURING PROPER AIR CIRCULATION
In order to ensure proper temperatures, air MUST ow
between the refrigerator and freezer sections.
• Cool air enters the freezer through the vents located
at the top of the compartment and exits through the
vents located behind the freezer drawers.
• Cool air from the freezer section enters the fresh food
section through vents located at the top of the
compartment. The air moves down throughout the
compartment and exits through the vents located
behind the crisper drawers.
• Do not block any of these vents with food packages.
If the vents are blocked, airow will be interrupted and
temperature and moisture problems may occur.
IMPORTANT:
Because air circulates between both sections, any
odors formed in one section will transfer to the other.
You MUST thoroughly clean both sections to eliminate
odors.To prevent odor transfer and dried out food, wrap
or cover foods tightly. (See the Food Storage Guide
section for details.)
NOTE: If you close the
refrigerator door, you may see
the freezer door open and
close again due to pressure
from internal air ow.
PRIOR TO USE
1. Clean your refrigerator thoroughly and wipe off dust
accumulated during shipping.
2.Install accessories such as ice cube bin, drawers,
shelves, etc., in their proper places. They are packed
together to prevent possible damage during
shipment.
3.Let your refrigerator run for at least 2 or 3 hours
before putting food in it. Check the ow of cold air in
the freezer compartment to ensure proper cooling.
Your refrigerator is now ready for use.
CONTROL PANEL FEATURES
Press the button for the desire function to review and
select other settings.
REFRIGERATOR AND FREEZER CONTROLS
Initially set the refrigerator and freezer controls to the
recommended (middle) settings by pressing
REFRIGERATOR Graphic and FREEZER Graphic.
NOTE: When changing control settings, wait 24 hours
before making additional adjustments. After 24
hours, adjust the compartments temperatures
as desired . The more lit bars, the colder the
refrigerator and freezer will be.
Display Off Mode
The display lights up and stays lit when the refrigerator
is plugged in for 60 seconds. After the display lights all
off except the dispenser icon selected (CRUSH,
WATER or CUBE) and the display only lights when door
is opened or display button is pressed. Display turn
off 20 seconds after door is closed or display button
pressed. You can change the display always ON
pressing “FREEZER” and “ICE PLUS” buttons at the
same time for 5 seconds. A tone will sound indicating
that the display is ON (Display Off Mode Deactivate).
Activate the Display Off Mode in same manner as
deactivation.
USING YOUR REFRIGERATOR
Loading ...
Loading ...
Loading ...