MAGNETIC AIR-VENT CAR MOUNT
1. 2. 3.
Product Overview
1. Magnetic Air-Vent Car Mount
2. Metal Rectangular Plate
3. Metal Circular Plate
Installation Instructions
Secure Method:
1. Choose either the rectangular plate or the circular plate.
2. Ensure where you plan to stick the metal plate (phone case/-
phone) is clean.
3. Remove 3M adhesive backing from metal plate.
4. Stick the metal plate directly onto the surface.
Reusable Method:
1. Choose either the rectangular plate or the circular plate.
2. Insert metal plate in between the phone and the phone case without
removing the adhesive backing.
Removal Instructions
1. Apply a few drops of rubbing alcohol around the metal
plate and the surrounding surface. This will help break apart
the adhesive bond.
2. Obtain a thin string (such as a fishing line) and in a
back-and-forth motion, slowly break apart the metal plate
from the surface.
3. When possible, peel away the metal plate and roll away
the remaining adhesive with your finger.
Warnings
Read all the instructions before using this product. Failure to read and follow these safety instructions could result in potential
hazards causing serious injury and/or property damage, for which damages you, (the purchaser), not Maxboost (the seller) is
liable.
1. DO NOT modify, disassemble, open, drop, crush, puncture, or shred the product.
2. This product is NOT intended for children and is NOT a toy. Keep out of reach of children.
3. Magnets can be harmful if swallowed.
4. Keep away from high voltage devices.
5. This product is NOT intended for children and is NOT a toy. Keep away from children. Magnets can be damaged sensitive
objects such as pacemakers, computer hard-drives, televisions, computer monitors, credit cards, magnetic ID cards, and other
similar objects.
Keep these objects at least 1 ft. away from the magnetic car mount.
6. Ensure that all persons who use this product are familiar with the safety guidelines set forth in this manual.
WARNING: DO NOT use any sharp materials to remove
adhesive as it may result in scratches and damages to your
devices and/or other surfaces.
NOTE: The 3M adhesive can only be used once. New
adhesives may be purchased to reuse the metal plate.
