Loading ...
Loading ...
Loading ...
07
Caution When violating the labeling requirement, it may cause serious injury or damage to the appliance.
Do not operate without loCking the hopper properly. It may cause an injury or a failure.
when DeteCting a gas leak, Do not insert the power CorD into its slot. open the
winDow to Ventilate Fully anD iMMeDiately.
It may cause injury or failure.
neVer put a Finger, Fork or spoon, etC. into juiCe outlet. It may cause injury or failure.
iF auger rotation is stoppeD in norMal operation, press [reVerse/reV] Button
anD holD For 2~3 seConDs anD then aFter reVerse operation is CoMpletely
stoppeD, press [on] Button again.
If such a stop event continues during the operation, the parts may be
damaged and performance may be deteriorated due to overheating in a motor. When the problem continues, immediately stop the
appliance and contact the local Customer Care Center.
During the operation, Do not atteMpt to MoVe the Base, DisasseMBle the ChaM-
Ber set or parts anD try to loCk theM.
It may cause an injury or a failure. Any act of event needed, switch off first and unplug the power cord.
when using the applianCe, Be CareFul For a neCktie, long neCklaCe, sCarF, etC.
not to Be entangleD into hopper Chute.
It may cause injury, failure or breakage.
plaCe the applianCe on a Flat anD staBle surFaCe. It may cause injury or failure.
Do not operate the applianCe For More than 30 Minutes at a tiMe.
It may cause a motor failure due to overheating. Cool it down sufficiently about 5 minutes and operate it again.
when plaCing ingreDients into the hopper Chute, only use the pusher proViDeD.
It may cause injury or failure.
Do not allow a seVere shoCk to the applianCe or Drop it. It may cause electric shock, fire or
damage.
iF the applianCe giVes oFF an unpleasant sMell or exCessiVe heating, sMoke,
stop using iMMeDiately anD ContaCt the loCal CustoMer Care Center.
When using a
new appliance, it gives off a smell and the smell disappears naturally over time.
always unplug the applianCe aFter use. always DisConneCt the applianCe FroM
the supply iF it is leFt unattenDeD anD BeFore asseMBling, DisasseMBling or
Cleaning. when unplugging the power CorD, Make sure to holD the power CorD.
Pulling on the wire to unplug may cause electric shock or fire.
Do not wash at high teMperatures oF 80
0
C(176
0
F) or higher. Do not put the ap-
plian
Ce in a Dishwasher, a Dryer or a MiCrowaVe etC.
It may cause a failure or parts deformation.
the applianCe weighs aBout 6.8kg (15lB). when MoVing the applianCe, ensure to
MoVe it holDing grips tightly at the Base BottoM with Both hanDs.
If attempting to hold chamber or the edge of the base, the base falls causing an injury or failure.
Loading ...
Loading ...
Loading ...