Loading ...
sharkclean.com sharkclean.com
QUICK
START
GUIDE
GENERAL WARNINGS
Your vacuum cleaner may consist of
a motorized nozzle, wand, hose, and/
or vacuum pod. This device contains
electrical connections, electrical wiring,
and moving parts that potentially
present risk to the user.
Use only identical replacement parts.
Carefully observe and follow the
instructions provided below to avoid
improper use of the appliance. DO NOT
use the vacuum for any purpose other
than those described in this manual.
Before use, carefully inspect all parts
for any damage. DO NOT use if any
parts are damaged.
The use of an extension cord is
NOT recommended.
This vacuum cleaner contains
no serviceable parts.
USE WARNINGS
DO NOT allow the appliance to be
used by children. Close supervision is
necessary when used near children.
This is not a toy.
Always turn off the vacuum cleaner
before connecting or disconnecting any
motorized nozzles or other accessories.
DO NOT handle plug or vacuum cleaner
with wet hands.
DO NOT use without filters in place.
Only use Shark® branded filters and
accessories. Failure to do so will also
void the warranty.
DO NOT damage the power cord:
a) DO NOT pull or carry vacuum
cleaner by the cord or use the cord
as a handle.
b) DO NOT unplug by pulling on cord.
Grasp the plug, not the cord.
c) DO NOT run the vacuum cleaner
over the power cord, close a door
on the cord, pull the cord around
sharp corners, or leave the cord
near heated surfaces.
DO NOT put any objects into nozzle or
accessory openings. DO NOT use with
any opening blocked; keep free of dust,
lint, hair, and anything that may reduce
airflow.
DO NOT use if nozzle or accessory
airflow is restricted. If the air paths or
the motorized floor nozzle become
blocked, turn the vacuum cleaner
off and unplug from electrical outlet.
Remove all obstructions before you
plug in and turn on the unit again.
Keep nozzle and all vacuum openings
away from hair, face, fingers,
uncovered feet, or loose clothing.
DO NOT use if vacuum cleaner is
not working as it should, or has been
dropped, damaged, left outdoors, or
dropped into water.
Use extra care when cleaning on stairs.
DO NOT leave the vacuum cleaner
unattended while plugged in.
When powered on, keep the vacuum
cleaner moving over the carpet surface
at all times to avoid damaging the
carpet fibers.
WARNING
To reduce the risk of fire, electric shock, injury, or property damage:
IMPORTANT SAFETY INSTRUCTIONS
FOR HOUSEHOLD USE ONLY • PLEASE READ CAREFULLY BEFORE USE
If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. DO NOT force into outlet or try to modify to fit.
To reduce the risk of electric shock, this appliance has a polarized plug (one blade
is wider than the other). This plug will fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper outlet. Do not change the plug in any way.
DO NOT place vacuum cleaner
on unstable surfaces such as chairs
or tables.
Your Shark® vacuum may not be
designed to stand up on its own. When
taking a break from cleaning, you may
need to lean it against furniture or a
wall, or lay it flat on the floor. Using the
vacuum for an application where the
unit lacks stability may result in
personal injury.
DO NOT use to pick up:
a) Liquids
b) Large objects
c) Hard or sharp objects
(glass, nails, screws, or coins)
d) Large quantities of dust (drywall
dust, fireplace ash, or embers).
DO NOT use as an attachment to
power tools for dust collection.
e) Smoking or burning objects
(hot coals, cigarette butts,
or matches)
f) Flammable or combustible materials
(lighter fluid, gasoline, or kerosene)
g) Toxic materials (chlorine bleach,
ammonia, or drain cleaner)
DO NOT use in the following areas:
a) Poorly lit areas
b) Wet or damp surfaces
c) Outdoor areas
d) Spaces that are enclosed and may
contain explosive or toxic fumes
or vapors (lighter fluid, gasoline,
kerosene, paint, paint thinners,
mothproofing substances, or
flammable dust)
Turn off all controls before plugging in
or unplugging the vacuum.
Unplug from electrical outlet when
not in use and before any maintenance
or cleaning.
Hand wash with water only. Washing
with cleaning chemicals could damage
the unit.
During cleaning or routine maintenance,
DO NOT cut anything other than hair,
fibers, or string wrapped around the
brushroll.
Allow all filters to air-dry completely
before replacing in the vacuum to
prevent liquid from being drawn into
electric parts.
Make sure the dust cup and all filters
are in place after routine maintenance.
If provided, secure the power
cord around the two cord hooks
during storage.
SAVE THESE INSTRUCTIONS
Loading ...
Loading ...
Loading ...