Loading ...
Loading ...
Loading ...
79
MAINTENANCE AND LUBRICATIO N
Spark Arrestor
WARNING
Failure to heed the following warnings while servicing the spark
arrestor could result in serious injury or death.
Do not perform service on the spark arrestor while the system is
hot. Exhaust system temperatures can reach 1000° F. Allow
components to cool sufficiently before proceeding.
Remove any combustible materials from the area.
Wear eye protection and gloves.
Do not stand behind or in front of the vehicle while purging.
Never run the engine in an enclosed area. Exhaust contains
poisonous carbon monoxide gas that can cause loss of
consciousness or death in a very short time.
Never go under the vehicle while it’s inclined.
Use the following procedure to periodically purge accumulated carbon
from the exhaust pipe.
1. Remove the arrestor clean-out
plugs (1) located on the bottom of
the muffler.
2. Shift the transmission to neutral.
Apply the brakes. Start the
engine.
3. Purge accumulated carbon from
the system by momentarily
revving the engine several times.
4. If carbon is expelled, cover or plug the exhaust outlet (2) and rap
on the pipe around the clean-out plugs while revving the engine
several more times.
5. If particles are still suspect ed to be in the muffler, elevate the rear
of the vehicle one foot higher than the front. Engage the park
brake. Block the wheels. Make sure the transmission is in neutral
and repeat steps 3 and 4 until no more particles are expelled when
the engine is revved.
6. Stop the engine. Allow the arrestor to cool.
7. Reinstall the arrestor plugs and remove the outlet cover or plug.
1
2
Loading ...
Loading ...
Loading ...