Loading ...
Loading ...
Loading ...
Technical safety
~
Ensure that the connection data on
the data plate (voltage and frequency)
match the mains electricity supply. It is
essential that they match to avoid
damage to the appliance.
~
Before using the vacuum cleaner,
check for any signs of damage. Do not
use a damaged appliance: It could be
dangerous.
~
The socket on the vacuum cleaner
(depending on model) must only be
used for the Miele Electrobrush
specified for use with this appliance.
~
There is a metal inlay underneath
the handle which is designed to avoid
the unpleasant effects of electrostatic
discharges. Please make sure that you
keep your hand in constant contact with
this metal strip during vacuuming.
~
Do not pull or carry the vacuum
cleaner by the cable and be careful not
to damage the cable when withdrawing
the plug from the socket.
–
Keep the cable away from sharp
edges and do not let it be squashed,
for example, under a door.
–
Avoid running the vacuum cleaner
over the cable.
This could damage the cable, plug or
socket and pose as a safety hazard.
The appliance must not be used if any
of these have suffered damage.
~
If the cable is damaged it must be
replaced together with a complete
cable rewind. For safety reasons this
must only be done by the Miele Service
Department or a Miele authorised
service technician.
~
While the vacuum cleaner is under
guarantee, repairs should only be
undertaken by a service technician
authorised by Miele. Otherwise the
guarantee will be invalidated.
~
Repairs should only be carried out
by a Miele authorised service
technician. Repairs and other work by
unqualified persons could be
dangerous. The manufacturer cannot
be held liable for unauthorised work.
~
It is important to switch the vacuum
cleaner off before changing over
accessories and floorheads, especially
an Electro- or Turbobrush.
~
Do not let the vacuum cleaner get
wet. Clean only with a dry cloth or
slightly damp cloth when disconnected
from the mains supply. If moisture gets
into the appliance, there is a risk of
electric shock.
~
Do not immerse the hose in water for
cleaning. The vacuum cleaner hose
should be checked regularly and must
not be used if damaged.
Warning and Safety instructions
7
Loading ...
Loading ...
Loading ...