Loading ...
Loading ...
Loading ...
User instructions
31
FAULT DESCRIPTION
E7
Turbine flow-regulator malfunction (relevant models
only)
The intake water quantity is not being measured
accurately. Interrupt the program and switch off the
dishwasher. Switch the dishwasher back on, program
it again and start the wash cycle. If the problem
persists, contact the after-sales service.
E8
Alternate wash system malfunction
Interrupt the program and switch off the dishwasher.
Switch the dishwasher back on, program it again and
start the wash cycle. If the problem persists, contact
the after-sales service.
E9
Water intake system malfunction
Contact the after-sales service.
Light off
Light on
Light flashing
If an alarm situation occurs, the appliance interrupts the program in progress
and signals a fault.
•
Alarms E1, E2, E3, E4, E8 and E9 interrupt the current program
immediately.
•
Alarms E5 and E6 interrupt the current program; once the problem is
solved, the program will finish running.
•
Alarm E7 is displayed at the end of the cycle which is finished
regardless of the problem, as operation of the dishwasher is not
affected.
To reset an alarm:
•
open and close the door, or turn the machine off and on again. The
dishwasher can now be programmed again.
If the malfunction persists, contact your Authorised Service Centre.
Loading ...