Loading ...
Loading ...
Loading ...
38
Description Dryer
Electrical requirements* Please refer to the rating label regarding detailed information.
Gas requirements* NG 4-10.5 inches WC
LP: 8–13 inches WC (Gas Models only)
Dimensions 27” (W) X 30” (D) X 38
11
/
16
” (H), 51” (D with door open)
68.6 cm (W) X 76.1 cm (D) X 98.3 cm (H), 129.7 cm (D with door open)
Net weight 126 lb (57.2 kg)
Drying capacity IEC 7.1 cu. ft. (22.5 lb / 10.2 kg)
SPECIFICATIONS
USING SMARTDIAGNOSIS
TM
- Only use this feature when instructed to do so by the call center agent. The transmission sounds similar to a fax machine, and so has no
meaning except to the call center agent.
- SMARTDIAGNOSIS™ cannot be activated if the dryer does not power up. If this happens, then troubleshooting must be done without
SMARTDIAGNOSIS™.
If you experience problems with your dryer, call 1-800-243-0000 (1-888-542-2623 in Canada). Follow the call center agent’s instructions, and do
the following steps when requested:
1. Press to turn on the dryer. Do not press any other buttons.
2. When instructed to do so by the call center agent, place the mouthpiece of your phone very close to the POWER button.
3. Press and hold (TEMP. CONTROL) for three seconds, while holding the phone mouthpiece to the icon or POWER button.
4. Keep the phone in place until the tone transmission has finished. This takes about 17 seconds, and the display will count down the time.
• For best results, do not move the phone while the tones are being transmitted and do not touch the control panel with the phone.
• If the call center agent is not able to get an accurate recording of the data, you may be asked to try again.
• Pressing the POWER button during the transmission will shut off the SMARTDIAGNOSIS™.
5. Once the countdown is over and the tones have stopped, resume your conversation with the call center agent, who will then be able to assist
you using the information transmitted for analysis at the call center agent.
SPECIFICATIONS
NOTA
MFL62512861_en_111221.indd 38 2011.12.21 10:35:38 AM
Loading ...
Loading ...
Loading ...