Loading ...
Loading ...
Loading ...
Tow fitting
The screw-in tow fitting should always be car‐
ried in the vehicle.
The tow fitting can be screwed in at the front
or rear of the BMW.
The tow fitting is located in the storage com‐
partment under the hood.
Tow fitting, information on use
▷ Use only the tow fitting provided with
the vehicle and screw it all the way in.
▷ Use the tow fitting for towing on paved
roads only.
▷ Use tow fitting located in the front only for
positioning the vehicle.
▷ Avoid lateral loading of the tow fitting, e.g.,
do not lift the vehicle by the tow fitting.
Otherwise, damage to the tow fitting and the
vehicle can occur.◀
Screw thread for tow fitting
Press on the mark on the edge of the cover to
push it out.
What to do after an accident
Hints
After an accident
After an accident, do not touch any high-
voltage components such as orange colored
high-voltage cables or parts that are in contact
with exposed high-voltage cables. Otherwise,
there is the risk of fatal injury from electrocu‐
tion due to the system's high voltage.◀
Esliding fluids
Do not touch any fluids esliding from the
high-voltage battery, or the skin can sustain
chemical burns.◀
General information
If you are involved in an accident with your ve‐
hicle, compliance with the following additional
safety precautions is required with regard to
the high-voltage system:
▷ Secure the crash site.
▷ Immediately notify rescue forces, police, or
firefighters of the fact that your vehicle is
equipped with a high-voltage system.
▷ Engage selector lever position P, set the
parking brake and reel off operating and
drive readiness.
▷ Lock the vehicle after exiting.
▷ Do not inhale any gases esliding from the
high-voltage battery; if needed, maintain a
safe distance from the vehicle.
Seite 199
Breakdown assistance Mobility
199
Online Edition for Part no. 01 40 2 960 865 - II/15
Loading ...
Loading ...
Loading ...