Loading ...
Loading ...
Loading ...
en Operating the appliance
20
Timer programming
Timer programming *
* depending on model
You can delay the start of the
programme in 1-hour steps up to
24 hours.
1. Close the door.
2. Switch on ON/OFF switch (.
3. Press button H until the digital
display @ jumps to œ:‹‚.
4. Press button H until the displayed
time corresponds with your
requirements.
5. Press START button 8, timer
programming is activated.
6. To delete the preselected starting
time, press the button H until œ is
indicated on the digital display.
You can change your programme
selection at any time until the
programme starts.
End of programme
The programme has ended when the
value ‹:‹‹ is indicated on the numerical
display @.
Switching off automatically
after the end of
the programme *
Switching off automatically after the end of the programme
* depending on model
To save energy, the dishwasher is
switched off 1 minute after the
programme ends (factory setting).
Automatic disconnection
can be adjusted from ˜:‹‹ to ˜:‹ƒ.
1. Close the door.
2. Switch on ON/OFF switch (.
3. Press and hold down the START
button 8.
4. Rotate programme selector 0
until ˜:‹... s indicated on the digital
display @.
5. Release button.
The factory set value ˜:‹‚ is lit on
the digital display @.
To change the setting:
1. Rotate programme selector 0 until
the required value is indicated on the
digital display @.
2. Press START button 8.
The set value is saved.
˜:‹‹ Appliance does not switch off
automatically
˜:‹‚ Off after 1 min
˜:‹ƒ Off after 120 min
Loading ...
Loading ...
Loading ...