Loading ...
Loading ...
Loading ...
EN10
DESCRIPTION AND USE OF THE HOOD
1. Control panel.
2. Extraction panel.
3. Grease lters.
4. Halogen lamps.
Control panel
1. OFF / Extraction speed (power) decrease button
2. ON / Extraction speed (power) increase button
Note: The intensive extraction speed (power) is timed and lasts for 5 minutes
(indicator c ashes); the hood then reverts to extraction speed (power) 2.
3. ON/OFF Timer button: delays the deactivation of the selected extraction
speed (power) by 5 minutes.
Note: the button is also used for the "Filter saturation signal reset" function
4. Light ON/OFF button
5. Display, shows:
a. Extraction speed (power): the indicator rotates according to the selected extraction speed (power).
Safety operation: the indicator ashes.
b. Grease lter saturation: comes on when lter maintenance is required.
c. Timer
d. Active carbon lter saturation: comes on when lter maintenance is required.
Note: this function is normally disabled and should only be activated if the hood is used as a lter version (with carbon lter tted).
To do so, proceed as follows:
- switch o the hood
- press and hold buttons 1 and 3 at the same time, until the indicator stops ashing (indicator disabled) and is lit steadily (indicator enabled).
- release the buttons.
To deactivate it, repeat the procedure: the indicator will no longer be lit steadily (indicator enabled) and will ash instead (indicator disabled).).
e. Lighting
Safety operation
The hood has a sensor which, in the event of a sudden increase in temperature, activates the appliance until the temperature drops signicantly.
Filter saturation signal reset
After carrying out lter maintenance, press and hold button 3 until indicator.
Loading ...
Loading ...
Loading ...