User Manual Thermador PRG305WH 30-Inch Pro Harmony® Standard Depth Gas Range

• User Manual - (English, French, Spanish)

• Instruction - (English)

• Specifiation - (English)

Care and maintenance

WARNING

Children should not be left alone or unattended in an area where appliances are in use.

• During the self-clean cycle, exterior surfaces may become hotter than usual. Parts of the appliance may become potentially harmful to children, and to persons who lack adult knowledge of appliances and lack adult reactions to potentially harmful conditions. Keep these individuals away during self-clean and while the appliance is in use.

• The elimination of soil during self-cleaning may facilitate the emission of small amounts of chemicals or other substances that may be harmful upon sufficient exposure. To minimize exposure to these substances, provide good ventilation with an open window, or use a ventilation fan or hood.

• For the self-cleaning cycle of your range, remove small animals and birds from the kitchen and surrounding areas. Open a nearby window for additional ventilation. During self-clean, fumes are released that may be harmful.

Brand names

The use of brand names is intended only to indicate a type of cleaner. This does not constitute an endorsement.

• The omission of any brand name cleaner does not imply its adequacy or inadequacy.

• Many products are regional in distribution and can be found in local markets.

• It is imperative that all cleaning products be used in strict accordance with the instructions on its package.

About self-clean

• The self-cleaning mode of your new range features pyrolytic self-cleaning. When set to the self-clean mode, the oven reaches a high temperature, approximately 850°F (454°C), that burns off the food soil.

• When the oven is set for self clean, the standard rangetop burners and the electric griddle and grill may be used. The burners having the ExtraLow® feature cannot be used.

• It is common to see smoke and/or flames during the clean cycle, depending on the content and amount of soil remaining in the oven. If a flame persists, turn off the oven and allow it to cool before opening the door to wipe up the excessive food soil.

• At the end of the clean cycle, some gray ash or burned residue may remain inside the oven. This is a mineral deposit that does not burn or melt. The amount of ash depends on how heavily soiled the oven was before it was cleaned. When the oven is cold, it is easily removed using a damp paper towel, sponge, or cloth.

Before self-cleaning the oven

DO NOT USE OVEN CLEANERS - No commercial oven cleaner or oven liner protective coating of any kind should be used in or around any part of the oven.

To reduce flare ups and excess smoke wipe out puddles of grease and any loose soil that can be easily removed. Remove any soil that is outside the door seal area. This appliance is designed to clean the oven interior and the portion of the door that is inside the oven. The outer edges of the door and the frame surrounding the front of the oven are not in the cleaning zone. Wipe this area clean.

BEFORE SETTING THE OVEN TO SELF-CLEAN

• Remove all utensils.

• Remove racks and rack guides.

• Clean the oven front frame and outer door edges.

• Wipe up large spillovers and grease.

• Be sure the light bulbs and glass covers are in place.

• Turn on the ventilator hood above the range and leave it on until the oven has completed the self-clean cycle

Self-clean

Self-cleaning (select models)

To set self-clean on 30'' dual fuel Harmony series models

1. Remove all utensils, racks, and rack guides. Ensure the oven door is shut.
2. Turn the mode knob to SELF CLEAN.
3. Turn the temperature knob to CLEAN.

- Self-clean duration is 2 hours.

To set self-clean on dual fuel models with a display

1. Remove all utensils, racks, and rack guides. Ensure the oven door is shut.
2. Turn the mode knob to SELF CLEAN and the temperature knob to CLEAN.
3. Press the right ) to set the desired clean level and press ENTER.

4. After the information text, press ENTER.

NOTE: The door closing process takes m approximately 20 seconds to complete, at which time the door becomes locked. Check to make certain the door is locked.

At the end of the clean cycle

CAUTION

The interior of the oven will still be at baking temperatures when the automatic lock cycles to its open position and the oven door can be opened.

The door latch will open automatically when the oven isbelow 500°F (260°C) and the automatic Door Lock completes its 20 second cycle to the open position.

1. Turn the mode knob to OFF.
2. Turn the temperature knob to OFF.

To set end time of self-clean

1. Remove all utensils, racks, and rack guides. Ensure the oven door is shut.
2. Turn the mode knob to SELF CLEAN.
3. Press the right ( or ) to set the desired clean level and press ENTER.
4. Press TIMERS, press the left ( or ), and select END TIMER.
5. Press the right ( or ) to set the END TIMER, and press ENTER. 6. After the information text, press ENTER.

NOTES:

• After self-clean completes its cycle, the self-clean function will be prevented from running again for a period of 24 hours.

• If the user tries to enable a self-clean function in an oven where the self-clean function has been restricted, the oven lights will blink on and off in 2-second intervals to indicate to the user that the function is not available. User must turn the knobs to OFF to cease the blinking lights.

Appliance cleaning tips

CAUTION

Avoid cleaning any part of the range while it is hot.

• The porcelain enamel finish is acid resistant, but not acid proof. Acidic foods, such as citrus juices, tomatoes, rhubarb, vinegar, alcohol or milk, should be wiped up and not allowed to bake onto the porcelain during the next use.
• The heating elements in the oven do not require cleaning. The elements burn themselves clean when the oven is in use.

When cleaning this appliance

• Use the mildest cleaning procedure that will do the job efficiently and effectively. Some cleaners of the same type are harsher than others. Try on a small inconspicuous area first.
• Always rub metal finishes in the direction of the polish lines for maximum effectiveness and to avoid marring the surface.
• Use only clean soft cloths, sponges, paper towels, fibrous brushes, plastic, non-metal or steel wool soap pads for cleaning and scouring, as recommended on the chart.
• Most exterior parts of this appliance can be cleaned with hot sudsy water (except the various items specifically identified otherwise). When rinsing is required, rinse thoroughly.
• Always wipe dry immediately to avoid water marks.

Troubleshooting