User Manual Frigidaire PLHS267ZCB Professional 25.8 Cu. Ft. Side-by-Side Refrigerator

Documents for Frigidaire PLHS267ZCB

The following documents are available:
User Manual Installation Instruction
  • Installation Instructions - (English) Download
Energy Guide Photos
PLHS267ZCB photo
P/N 240389311 (0303)
Loading ...
Loading ...
Loading ...

Specifications

Frigidaire PLHS267ZCB Questions and Answers


#1 How often should I change my water filter?

In general, you should change your water filter every six months to ensure the highest possible water quality.

On most models, the Water Filter Status on your display will illuminate and prompt you when it’s time to replace the filter. If your refrigerator has not been used for a period of time (during moving for example), it is recommended to change the filter before reinstalling the refrigerator.

To order replacement filters, simply go to our Filter & Parts page. Remember to order the same filter type that is currently in your refrigerator.

#2 How often should I change my water filter?

In general, you should change your water filter every six months to ensure the highest possible water quality.

On most models, the Water Filter Status on your display will illuminate and prompt you when it’s time to replace the filter. If your refrigerator has not been used for a period of time (during moving for example), it is recommended to change the filter before reinstalling the refrigerator.

To order replacement filters, simply go to our Filter & Parts page. Remember to order the same filter type that is currently in your refrigerator.

#3 How do I use the features and functions on my Side-by-Side refrigerator display?

Depending on your model, there are various features and functions available on your Side-by-Side refrigerator. It is always recommended to check out your Owner’s Manual for more descriptions of these features.

Press OPTIONS to illuminate the center of your display – this will show you the available features and functions.

Use the UP or DOWN key to scroll through the menu that appears in the center of your display.

To change a setting to ON or OFF, press the +; then press SET to select. When selection is made, go back and press OPTIONS to save.