Loading ...
Loading ...
Loading ...
5
x the lower part of the appliance with the 2 remaining
screws C.
USE
Operation and use
Plug into the mains, turn the thermostat dial to maximum
and turn the appliance on by means of the power selector (see
description) as described below:
• Turn the power selector knob to the Min position to select
minimum power.
• Turn the power selector knob to the Med position to select
medium power (only in some models).
• Turn the power selector knob to the Max position to select
maximum power.
• Turn the power selector knob to the Max position
to select maximum power with the fan (the MAX + FAN
indicator light comes on).
• To turn the appliance o completely: turn the power
selector to the "0" position and the thermostat to the " "
position, then unplug from the mains.
Adjusting the thermostat
When the room has reached the required temperature, turn
the thermostat dial slowly anticlockwise until you hear a click
and no further. The thermostat will automatically regulate the
temperature set and keep it constant. In spring or autumn or on
mild days, you can save energy by using minimum power.
Frost prevention mode
With the thermostat dial in the position and one of the power
levels selected, the appliance maintains room temperature
at about 5°C, preventing freezing with minimal energy
consumption.
Fan
This appliance has two fans for faster more even heating. To use
this function, turn the power selector to the Max position.
Models with 24 hour timer
When the appliance is plugged to the mains the timer is always
in turning movement, in order to stay synchronized with the
local time.
To operate the appliance without the timer, place the timer
slider in the position. To operate the appliance at set
times, position the slider in the position and proceed as
follows:
• Check the time on your clock or watch. If it is 10.00 for
example, turn the numbered programmer disk until the
number 10 coincides with the pointer marked on the
programmer.
• Set the periods of time during which you want the
appliance to operate by pushing the teeth outwards (see
gure). Each tooth
corresponds to a period
of 30 min. At the end of
this procedure, sectors
corresponding to the
operating periods can
be seen.
• In this way, the
appliance will function
automatically each day at the times set. (Important: the
appliance must always be plugged into the socket)
• To modify programming, return the teeth to the initial
position and set the new operating periods.
• To turn the appliance o, turn the power selcector to the
"0" position.
MAINTENANCE
Before carrying out any maintenance, unplug the heater from
the mains and wait for it to cool o completely. This heater
requires no particular maintenance. It is sucient to remove
the dust with a soft, dry cloth. Never use abrasive powders or
solvents. If necessary remove concentrated areas of dirt with a
vacuum cleaner.
TECHNICAL CHARACTERISTICS
Power supply See rating plate
Absorbed power “