Loading ...
Loading ...
Loading ...
Installation
60
Hob seal
To prevent leakage of liquid between the
frame of the hob and the work surface,
place the insulating seal provided in
position before assembly, as shown in the
figure below.
1. Refer to the dimensions in the figure,
bearing in mind that the long front side
must brush against the hole.
2. Use light pressure to make the seal stick
to the edge around the hole cut in the
worktop.
3. Carefully trim the surplus away from
edge (C) beyond the seal.
5.4 Fixing to the supporting structure
Fix the hob to the unit using the appropriate
bracket (A) and the spacer (B) supplied.
This mounting configuration (A+B) should
only be used for the front left corner of the
appliance, as shown in the following
figures.
60 cm
Loading ...
Loading ...
Loading ...