Loading ...
Loading ...
Loading ...
279
*
[SV19000(ALL)01/95]
RWARNING
Failure to follow these instructions
could result in serious personal
injury from hot engine coolant or
steam blowout and/or damage to the
engine cooling system or engine.
*
[SV19050(ALL)03/95]
To find out how much engine coolant mixture
your vehicle’s coolant system can hold, see Refill
capacities for fluids in the Index.
[SV19100(ALL)04/95]
Add engine coolant only to the coolant
reservoir. If the coolant level is low, add to the
reservoir a 50/50 mixture of water and the type
of engine coolant that Ford specifies. You may
add water by itself only in an emergency, but
you should replace it with a 50/50 mixture as
soon as possible.
[SV19104(ALL)04/95]
Ford Premium Cooling System Fluid is an
optimized formula that will protect all metal and
rubber elastomers used in Ford engines for four
years or 50,000 miles (80,000 km). It is not
necessary and not recommended to use
supplemental coolant additives in your vehicle.
These additives may harm your engine cooling
system. Follow the recommended service interval
for changing your engine coolant.
*
[SV19106(ALL)04/94]
NOTE: When you change or add engine
coolant, it is important to maintain
your engine coolant concentration
between 40% (-11˚F [-24˚C]) and 60%
(-62˚F [-52˚C]), depending on your local
climate conditions. Below 40% you will
lose freeze protection and above 60%
your engine may overheat on a warm
day.
File:fcsvs.ex
Update:Wed Dec 20 09:36:55 1995
Loading ...
Loading ...
Loading ...